Kingston KVR SO-DIMM DDR4 1x8Gb KVR26S19S8/8

This document describes ValueRAM's KVR26S19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM) 1Rx8 non-ECC memory module based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers.

Power Supply: VDD = 1.2V Typical. VDDQ = 1.2V Typical. VPP = 2.5V Typical. VDDSPD = 2.2V to 3.6V. Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals. Low-power auto self refresh (LPASR). Data bus inversion (DBI) for data bus. On-die VREFDQ generation and calibration. Single-rank. On-board I2 serial presence-detect (SPD)... moreEEPROM. 16 internal banks; 4 groups of 4 banks each. Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS). Selectable BC4 or BL8 on-the-fly (OTF). Fly-by topology. Terminated control command and address bus. PCB: Height 1.18” (30.00mm). RoHS Compliant and Halogen-Free. This document describes ValueRAM's