Kingston KSM HDR DDR4 1x8Gb KSM32RS8/8HDR

Kingston Technology KSM32RS8/8HDR memory module 8 GB 1 x 8 GB DDR4 3200 MHz ECC

Power Supply: VDD = 1.2V. VDDQ = 1.2V. VPP = 2.5V. VDDSPD = 2.41V to 2.75V. Functionality and operations comply with the DDR4 SDRAM datasheet. 16 internal banks. Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for. the banks in the same or different bank group accesses are available. Data transfer rates: PC4-3200, PC4-2933, PC4-26... more66, PC4-2400, PC4-2133, PC4-1866, PC4-1600. Bi-Directional Differential Data Strobe. 8 bit pre-fetch. Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop). Supports ECC error correction and detection. On-Die Termination (ODT). Temperature sensor with integrated SPD. This product is in compliance with the RoHS directive. Per DRAM Addressability is supported. Internal Vref DQ level generation is available. Write CRC is supported at all speed grades. CA parity (Command/Address Parity) mode is supported. Kingston's KSM32RS8/8HDR is a 1G x 72-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM) registered w/ parity, 1Rx8, ECC, memory module, based on nine 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.. Features. JEDEC standard. Yes. Country of origin. Taiwan. Programming power voltage (VPP). 2.5 V. Row active time. 32 ns. Refresh row cycle time. 350 ns. Row cycle time. 45.75 ns. Module configuration. 1024M x 72. Memory voltage. 1.2 V. Memory ranking. 1. CAS latency. 22. ECC. Yes. Memory form factor. 288-pin DIMM. Component for. PC/Server. Memory clock speed. 3200 MHz. Internal memory type. DDR4. Memory layout (modules x size). 1 x 8 GB. Internal memory. 8 GB. Buffered memory type. Registered (buffered). Weight & dimensions. Height. 31.2 mm. Width. 133.3 mm. Logistics data. Harmonized System (HS) code. 84733020. leaflet