Diamond Core Bits & Milling Cutters

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application more→allows. Neatly cuts grooves on doors or frames to accept a weatherseal. Groove can be positioned in bottom of a rebate. Specifications • Shank Diameter: 1/4 • Dia Metric: 34 • Cut Length Metric: 3 • Overall Length Metric: 55.5 • Bearing Dia Metric: 20

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application more→allows. Neatly cuts grooves on doors or frames to accept a weatherseal. Groove can be positioned in bottom of a rebate. Specifications • Shank Diameter: 1/4 • Dia Metric: 34 • Cut Length Metric: 2 • Overall Length Metric: 54.5 • Bearing Dia Metric: 20

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers. Specificat more→ions • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 53 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber man-made particleboard and fibreboard. Popular uses include edging window frames glazing more→bars cabinets tabletops pencil rounds trophies shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile.This Trend TCT Bearing Guided Ovolo & Round Over has the following specification: Radius: 1.6mmDiameter: 15.9mmCutter Height: 7.9mmShank: 1/4inBearings: 9.5 12.7mmPTDTRE4611514TC

1P250-0318-XA1630 Plura Solid Carbide End Mill for Heavy Roughing by Sandvik Coromant

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metr more→ic: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 54 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 57

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly more→suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a t more→ough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications Diameter …

Precise fit and long service life thanks to high-grade carbide tips, optimised cutting geometry and a precision-ground finish. Features and Benefits: • For profiling: 2 rounding over bits, 1 cha more→mfer/trimming cutter, 2 core box bits, 1 edge forming bit, 1 V-slot cutter. • For precise connections: 1 trimming cutter, 3 slot cutters, 1 dovetail bit. Specifications: Contents: 2 rounding over bits with ball bearing: Ø 21.8, R 6.3, L 13.5 mm; Ø 28.1, R 9.5, L 16.5 mm 1 laminate trim bit: Ø 12.7 , L 13 mm 1 chamfer bit: Ø 31.5 / angle 45°, L 15 mm 2 core box bits: Ø 12.7, R 6.3, L 12.7 mm; Ø 21.8, R 6.3, L 13 mm 3 straight bits: Ø 6 / 12 / 16, L 19.7 mm 1 edge forming bit: Ø 25, R 4.5, L…

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Overall Length Metric: 90 • Bearing Dia Metric: 12.7

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly more→suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 67 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 3 degree shear. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 107

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/2 • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/4 • Dia Metric: 28.5 • Cut Length Metric: 14.3 • Cut Length Imperial: 9/16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to more→20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Features & Benefits • Rotabroach Mini Cutters cut clean, burr-free holes in seconds • The professional solution for cutting holes in sheet metal, pipes and plastics • Precision ground teeth and flutes …

The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, partic more→le boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 4.76 • Dia2 Imperial: 3/16 • Overall Length Metric: 84 • Type or Grade: TCT

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 72

For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000 - 24000 RPM. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 18 • Cut Length Metric: 12 • Overall Length Metric: 45 • Angle: 90

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 70 • Bearing Dia Metric: 9.5

Lenox Diamond hole saws are designed to cut more holes in less time. They are durable and long lasting, with oversized slots for quick removal of waste material. Specifications • Diameter: 44mm & more→bull; Compatible Arbors: 2L, 3L, 6L, 7L Features and Benefits • Brazed edge lasts longer in tiles and stone • Robust design for greater durability in tough applications • Low torque, little pressure required • Oversized slots for easy plug removal Contents • Hole Saw only • No Arbor or Pilot Drill (see specifications for compatible arbors)