Zalman ZM-T7 black
 |
 |
Relatively inexpensive case with a stylish design and thoughtful design. The system unit has medium-sized dimensions (Midi Tower). The chassis is designed to install an ATX-class motherboard. Based on this case, you can assemble a powerful and performant computer system. That is why this model provides 8 seats for the installation of fans. By the way, the Zalman ZM-T7 case is initially equipped with a pair of coolers — one bladed impeller with a diameter of 120 mm is located on the front panel, and the second, the same, on the back.
An important feature of the system unit is the presence of a translucent side window. The removable sidewall is made of tinted acrylic. There are 7 plugs for PCI-E on the rear panel, and the control panel received a pair of audio jacks (microphone and headphone output), a USB 3.2 gen1 port, a pair of USB 2.0 connectors and power buttons. Inside the system unit, it will be possible to install a graphics adapter up to 305 mm long and a processor cooler up to 160 mm high. Additionally, there is space for four 2.5" hard drives and two more 3.5" HDDs. The case is designed to install an ATX power supply, while the PSU mounting location is at the bottom. This model is equipped with a cable management system.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Zalman 2026 - new arrivals, bestsellers, and the most relevant models Zalman.
A normal case, suitable for budget builds. The Gtx 1070 msi armor fit comfortably. All the bolts are included in the kit, the zip bags are very convenient. Everything is easy to unscrew and insert, and nothing gets in the way. If only there were more holes for cables from the power supply, otherwise the CPU power would pass through the bottom and under the video card is not very convenient, otherwise everything is fine  HASKI 2.0: use Zalman ZM-T7 less than month |
The case is cheap, there is a lot of space for fans, for a cooler max. 160mm, dust filters (easily removable). Well, except that the front panel is a bit heavy to remove, and I had to bend something a little to fit in the power supply (super flower 750w) |
Thanks to this shell (Case), you can assemble a not frail PC, you can even make a freezer here))) Very convenient for placing coolers, stylish and looks beautiful! I'm offended by the fact that sometimes some power supplies didn't fit ((( |
