Makita TW008GZ01

The Makita TW007G is a Cordless Brushless Impact Wrench powered by a 40v Max XGT Li-Ion battery. Variable speed controlled by trigger, to deliver up to 2,900ipm, 2,300 rpm, 760Nm maximum tightening torque and 1,100 Nm nut busting torque for a wide range of applications. It is equipped with a convenient 1/2” square driving shank and socket can be fi... morexed with a C-ring. This impact wrench also features both forward and reverse rotation modes. Features & Benefits • Auto-stop system • Brushless Motor • Electric brake • Electronic 4 stage impact power selection • Ergonomic soft grip • Forward / reverse rotation • Trigger switch with full speed mode • Twin LED job light • Variable speed control by trigger Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Driving Shank: 1/2" Square Pin Detent • High Strength Bolt (Grade 10.9): M10-M16 • High Strength Bolt (Grade F10T): M12-M16 • Max Fastening Torque: 760 Nm • Nut Busting Torque: 1,100 Nm • Standard Bolt: M10-M24 • No Load Speed (Max/Hard/Med/Soft): 0-2,300 / 0-1,900 / 0-1,200 / 0-600 rpm • Blows per Minute (Max): 0-2,900 ipm • Blows per Minute (Hi): 0-2,700 ipm • Blows per Minute (Med): 0-1,900ipm • Blows per Minute (Lo): 0-1,200ipm • Noise K Factor: 3 dB(A) • Noise Sound Power: 108 dB(A) • Noise Sound Pressure: 97 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: Fastening Bolt: 19.7 m/sec² Contents • Makita TW008G 40v Max XGT Cordless Brushless Impact Wrench • No Batteries • No Charger • Makpac Case Type 3 • Belt Clip

The Makita TW008G XGT 40Vmax BL Impact Wrench is an efficient brushless impact wrench with electronic 4 stage impact power selection for added versatility. 3 modes of reaction time allow for automatic stop available both in forward and reverse rotation modes. Reverse rotation auto stop mode stops after the bolt/nut is loosened enough. Its ergonom... moreically designed handle features a rubberised soft grip for increased user comfort and reduced fatique. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection system automatically shuts off power when the battery level is low. It also features twin LED lights with pre-glow and afterglow functions. Specifications: Bit Holder: 1/2in Square Pin Detent.No Load Speed: 0-600/1 200/1 900/2 300/min.Impact Rate: 0-1 200/1 900/2 700/2 900/bpm.Max. Torque: 760Nm.Nut Busting Torque: 1 100Nm.Bolt Capacity: Standard: M10-M24 High Tensile: M10-M16.The Makita TW008GZ01 XGT 40Vmax BL Impact Wrench is supplied in a MAKPAC as a Bare Unit - No Battery or Charger.PTDMAKTW008GZ1