DeWALT DWE4233
Cutting Discs241
 |
Up to 1.5x faster than a Bosch X431 Flap Disc Flap discs offer a great combination of durability and fast stock removal, and this PRO X571 is even faster than most. The PRO X571 Flap Disc has an X-c more→loth backing for stable grinding. The advanced grain fusion of aluminium oxide and zirconia offers fast stock removal and makes this flap wheel efficient, even when you use it on hardened steel. With 22.23 mm bore for standard locking nut angle grinders Tested in Bosch labs according to Bosch standard procedures. Features and Benefits: • Up to 1.5x faster than a Bosch X431 Flap Disc • With 22.23 mm bore for standard locking nut angle grinders • For grinding metal, eg when removing …
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Designed for cutting metal Need a long-lasting cutting disc to make fast cuts in metal? Try the PRO Metal. We made it using high-quality abrasive grains for strength and durability. We made the dura more→ble PRO Metal Bonded Cutting Disc with premium aluminium oxide grains to make sure it cuts effectively. And combined the grains with functional fillers and embedded them in a phenol resin matrix for strength and resistance to heat. We reinforced the disc with a high-quality fibreglass net for safer and more stable performance. With 22.23 mm bore for standard locking nut angle grinders Features and Benefits: • Designed for cutting metal • With 22.23 mm bore for standard locking nut angle …
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 5
 |
General-purpose flat cutting discs recommended for use with Sealey and other leading makes of grinding and cutting power tools. Features & Benefits: • General-purpose flat cutting discs recommended f more→or use with Sealey and other leading makes of grinding and cutting power tools. • Model No. PTC/125C Specifications: Model No PTC/125C Bore: Ø22mm Brand: Sealey Disc Size: Ø125 x 3mm Nett Weight: 0.09kg
 |
• For light grinding work. Thanks to the flexibility of the disc, it is ideally suited to working on curved surfaces. Other advantages of the disc: less vibration and noise development, cool grin more→ding (less heat discolouration)
Wire & Cup Brushes295
 |
Price from £13.99 up to £31.95
Compare prices6→Compare prices and buy Lessmann 0.5 Steel Wire Conical Knot Brush 115mm M14 Thread LES472257
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 115mm.Width.10m
 |
Price from £17.83 up to £29.99
Compare prices7→Compare prices and buy Draper Expert Twist Knot Wire Cup Brush 60mm M10 x 1.5 Thread
Expert Quality, industrial quality manufactured from 0.8mm hardened steel wire. Designed for use with angle grinders. Features and Benefits • Expert Quality • For angle grinders • 0.8m more→m hardened steel wire Contents 1 x Twist Knot Wire Cup Brush, 60mm, M10
 |
Price from £1.86 up to £2.95
Compare prices6→Compare prices and buy Draper Flat Top Decarbonising Wire Brush 13mm 6mm Shank 41437
This wire end brush is designed for decarbonising cylinder head ports and engine components. The bristles are made from hardened dipped brassed steel wire, which gives a high level of durability and r more→esistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. Its size and shape makes it ideal for hard-to-reach areas such as drill holes, recesses and corners. Fitted with a 6mm round shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Features and Benefits • Designed for decarbonising cylinder head ports and engine components • …
 |
Price from £9.88 up to £17.99
Compare prices8→Compare prices and buy Faithfull Wire Conical Brush 115Mm Xlock, Multi FAIWBCT115XL
X-LOCK Conical Wire Brush for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on steel surface more→s, aluminium and non-ferrous metal surfaces. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Features: X-LOCK quick change system for fast change between tools 0.5mm twist knot stainless steel wire (304) 0.5mm twist knot stainless steel wire (304) Use with steel, aluminium and non-ferrous metal surfaces Specifications: Dimensions: H:14.0 x W:2.5 x D:12.5 cm Colour: Multi Guarantee:5 years Material: Metal …
 |
Price from £6.40 up to £8.96
Compare prices7→Compare prices and buy Sealey Twisted Knot Wire Cup Brush 65mm M14 Thread
Suitable for use with power tools up to the maximum rated rpm. Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal. Features & Benefits: • Suitable for use wit more→h power tools up to the maximum rated rpm. • Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal. • Model No. TKCB651 Specifications: Model No TKCB651 Brand: Sealey Diameter: Ø65mm Maximum Speed: 12500rpm Nett Weight: 0.19kg Thread: M14 x 2mm
 |
Price from £9.35 up to £11.95
Compare prices7→Compare prices and buy Sealey Brassed Wire Cup Brush 125mm M14 Thread CBC125
Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Features & Benefits: • Suitable for use with power tools up to th more→e maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC125 Specifications: Model No CBC125 Brand: Sealey Diameter: Ø125mm Maximum Speed: 6500rpm Nett Weight: 0.54kg Thread: M14 x 2mm
 |
Price from £17.18 up to £21.99
Compare prices6→Compare prices and buy Lessmann 0.35 Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread LES482117
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.35.Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £2.12 up to £2.99
Compare prices6→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBS50
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.