DeWALT DCG405H2T
Cutting Discs229
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad. Depressed centre disc suitable for electric and air tools. Features & Benefits: • Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø125/22mm. • Model No. FD125120E Specifications: Model No FD125120E Bore: Ø22mm Brand: Sealey Disc Size: Ø125mm Grit:…
 |
Aluminium oxide, depressed centre disc for electric and air tools. Suitable for metal grinding applications.
 |
The Marcrist BC750 Diamond Blade is a high-performanc
 |
48.99Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
Planer knife 56 mm, straight, tungsten carbide, 40°.The Wood Razor Carbide Reversible Planer Knife offers smooth, clean, perfect planing results in solid wood surfaces.Its sharp blades are double-edge more→ground, enabling the reversible use of either side.Made of Micrograin Carbide, the knife features an extremely sharp cutting edge that achieves consistently fine and even finishes.Microg
 |
Up to 1.5x faster than a Bosch X431 Flap Disc Flap discs offer a great combination of durability and fast stock removal, and this PRO X571 is even faster than most. The PRO X571 Flap Disc has an X-c more→loth backing for stable grinding. The advanced grain fusion of aluminium oxide and zirconia offers fast stock removal and makes this flap wheel efficient, even when you use it on hardened steel. With 22.23 mm bore for standard locking nut angle grinders Tested in Bosch labs according to Bosch standard procedures. Features and Benefits: • Up to 1.5x faster than a Bosch X431 Flap Disc • With 22.23 mm bore for standard locking nut angle grinders • For grinding metal, eg when removing …
 |
PRO Metal Grinding Wheel, 125 x 26 x 20 mm, G24.Need a strong and long-lasting grinding wheel to resharpen your tools? Or clean metal and cast-iron surfaces? The combination of premium abrasive grains more→and strong bonding material gives the PRO Metal the strength and endurance you need to get the job done.The PRO Metal Grinding Wheel is a long-lasting accessory for metalworkers who need to grind metal and cast-iron elements.The disc is highly efficient when coarse grinding and resharpening tools.It uses a combination of high-quality aluminium oxide grains and a strong synthetic resin bonding for strength and durability.Mate
Wire & Cup Brushes310
 |
Price from £13.99 up to £27.95
Compare prices7→Compare prices and buy Bosch Accesorios X-lock Heavy Metal 75x0.5x125 M Twisted Wire Cup Brush 2608620727
X-Lock Heavy For Metal Cup Brush, Knotted Wire Provides An Aggressive Cleaning Performance It Is Suitable For Use With X-Lock Angle Grinders.Featur
 |
Price from £14.70 up to £17.95
Compare prices6→Compare prices and buy Draper Expert Brassed Steel Wire Cup Brush 60mm M10 x 1.5 Thread
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Features and Benefits • Expert Quality • For angle grinders &bu more→ll; 0.3mm hardened brassed steel wire Contents 1 x Crimped Wire Cup Brush, 60mm, M10
 |
Price from £2.12 up to £2.95
Compare prices5→Compare prices and buy Faithfull 04012061301 Wire End Brush 12Mm Pointed End FAIWBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.PTDFAIWBSI12P
 |
Price from £3.64 up to £5.49
Compare prices6→Compare prices and buy Draper Brassed Wire Wheel Brush 100mm 6mm Shank 41428
This wire wheel brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which g more→ives a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The wheel shape is designed to work perpendicular to the surface, making it ideal for smaller and tighter areas. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Features and Benefits • Designed for light …
 |
Price from £5.21 up to £6.49
Compare prices5→Compare prices and buy BlueSpot Bevelled Crimped Steel Wire Cup Brush 115mm M14 Thread 19220
The BlueSpot Tools Steel Bevel Wire Cup Brush is manufactured from hardened steel wire for increased durability. Ideal for preparing metal surfaces for welding and painting. Specifications: Wire: 0.3m more→m.Diameter: 115mm (4 1/2in) / M14 x 2 Fitting.Maximum safe speed: 12,500 RPM.Additional Information:&bu
 |
Price from £32.68 up to £35.95
Compare prices5→Compare prices and buy Lessmann 0.5 Stainless Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread LES482817
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Stainless.Max. R.P.M. 12,500.Addition
 |
Price from £46.82 up to £49.95
Compare prices5→Compare prices and buy Lessmann X Lock Non Sparking Stainless Steel Knotted Wire Wheel 125mm X-Lock 473.81X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Wheel Brush 125mm Non Spark
 |
Price from £3.00 up to £3.49
Compare prices5→Compare prices and buy Faithfull Crimped Wire Wheel Brush 100mm 6mm Shank WBS100C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.