Drill Bits

Sherwood HSS quick spiral extra length Vent drills are designed for drilling the initial vent hole in aluminium tyre moulds, and are also used in the tyre industry for clean-out work post production where the high helix and extra reach are ideal for the efficient evacuation of waste rubber. Manufactured to works standard. 118 point angle.

Maximum Precision - The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics.…

Dormer A0021/8 A002 HSS-TiN Coated Tip Jobber Drill made from high-speed steel The Dormer A0021/8 A002 is a General Purpose Jobber Drill Bit with a 1/8 inch diameter. These drill bits have tin coated tips for longer life and wear resistance and are made from high-speed steel which is extremely durable for fast efficient drilling. Sold in a box of 10 these multipurpose drill bits perform well in plastic steel and aluminium. Features: Can be used in many different handheld and machine applications Improved accuracy with more accurate holes and a better quality of finish The 118-degree split point aids self-centring when used by hand and also reduces the push force required Premium HSS material …

Series 2020 HSS-Co Straight Shank Heavy Duty Stub Drills Metric Heavy duty drill made of cobalt material with excellent heat resistance. For drilling steels up to 1,400N/mm2, stainless steel, heat resistant steels and bronze. Ideally suited for volume production on automatics. TiN coating provides longer tool life or increased cutting speeds. Point angle: 135, helix angle: normal, web thickness: strengthened, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328, DIN 1897RN. Point to DIN 1412C.

Sherwood HSS quick spiral extra length Vent drills are designed for drilling the initial vent hole in aluminium tyre moulds, and are also used in the tyre industry for clean-out work post production where the high helix and extra reach are ideal for the efficient evacuation of waste rubber. Manufactured to works standard. 118 point angle.

Guhring Series 9651 HSS TiN Tip Drills general purpose drills offer a longer tool life thanks to the TiN coted tip. Especially suitable for the machining of steel and cast steel (alloyed and unalloyed), grey cast iron, malleable cast iron, spheroidal graphite iron, sintered iron and graphite with high concentricity characteristics. Features and Benefits High speed steel construction for durability TiN coated tip for increased tool life and performance Ideal for drilling a range of materials including cast steel and iron Standards Manufactured to BS 328/DIN 338RN Typical Applications Steel Steel alloys Cast iron Spheroidal graphite iron Sintered iron Graphite Notes Available in …

Series 1024 HSS-Co Heavy Duty Straight Shank Drills Tin Tipped - Metric Heavy-duty drill used to drill steels with a tensile strength up to 1,400 N/mm2. Stainless steels, heat and acid resistant steels and phosphor bronze. TiN coating provides longer tool life. Point angle: 135. Helix angle: normal. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Manufactured to DIN 338 RN.

Lasting Performance in Concrete - The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. It is compatible with cylindrical shank systems for all corded or cordless impact …

Series 1001 general purpose drill, to drill steels with a tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. TiN coating provides longer tool life. Features and Benefits HSS construction for increased strength TiN coating provides longer tool life due to increased heat and wear resisitance Ideal for general purpose use Standards Manufactured to DIN 338 RN, DIN 338.

205 Series HSS drills are suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Finished with a black oxide coating for aiding chip flow and heat dissipation. Features and Benefits Manufactured form high speed steel for durability Black oxide finish for improved chip flow and heat dissipation Suitable for use with a range of metals including steel and cast iron Standards BS 328, DIN338RN Typical Applications Steel Steel alloys Grey cast iron Spheroidal iron Sintered powder metal German silver Graphite Notes Available in metric sizes 0.4mm - 20.0mm

205 Series HSS drills are suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Finished with a black oxide coating for aiding chip flow and heat dissipation. Features and Benefits Manufactured form high speed steel for durability Black oxide finish for improved chip flow and heat dissipation Suitable for use with a range of metals including steel and cast iron Standards BS 328, DIN338RN Typical Applications Steel Steel alloys Grey cast iron Spheroidal iron Sintered powder metal German silver Graphite Notes Available in metric sizes 0.4mm - 20.0mm

The DEWALT HSS G-Jobber Drill Bit is a precision ground twist drill bit for rapid drilling long-life and excellent concentricity. It has been manufactured from High-Speed Steel that conforms to DIN 338. The drill bit is ground from solid stock and has a right-hand cutting type N flute with a precision ground end at 118° point angle.This DEWALT HSS-G Jobber Drill Bit has the following specification: Diameter: 4.5mmOverall Length: 80mmWorking Length: 47mmPack Quantity: 1PTDDEWDT5212QZ

Series S100 HSS straight shank stub drills are designed as general purpose drills for use on automatics and turret lathes. Suitable for drilling steels, cast iron, alloy steel and malleable cast iron. Features and Benefits Manufactured form HSS for strength and rigidity when machining Black oxide coating for additional heat and wear resistance Designed for use on automatic and turret lathes Typical Applications Drilling Steels Cast iron Alloy steel Malleable cast iron Standards Manufactured to BS328: Part 1: 1986/DIN 1897.

Series 1001 general purpose drill, to drill steels with a tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. TiN coating provides longer tool life. Features and Benefits HSS construction for increased strength TiN coating provides longer tool life due to increased heat and wear resisitance Ideal for general purpose use Standards Manufactured to DIN 338 RN, DIN 338.

Series 1060 HSS-Co Straight Shank High Helix Jobber Drills TiN Coated - Metric Heavy duty drill for stainless steel, heat and acid-resistant steels, short chipping and high strength steels. High heat resistance allows drilling in titanium and titanium alloys. TiN coating provides longer tool life. Point angle: 130. Helix angle: high. Web thickness: strengthened. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Manufactured to DIN 338RN.

Series L100 HSS straight shank long series drills are excellent general purpose drills which are designed to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Features and Benefits Manufactured from HSS for improved toughness Black oxide coating for greater heat and wear resistance Ideal for general purpose drilling Typical Applications Drilling Steels Grey cast iron Malleable cast iron Nickel brass Graphite Standards Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494.

Crafted from high-speed steel (HSS) with a titanium nitride (TiN) coating, this drill bit offers exceptional durability and heat resistance, ensuring long-lasting performance in a variety of drilling applications. This jobber drill bit is ideal for creating precise and accurate holes in metal, wood, plastic, and other materials. The TiN coating reduces friction and heat buildup during drilling, resulting in smoother drilling and extended tool life. Features & Benefits • Versatile bit for both hand-held and machine drilling • Titanium Nitride Tipped (2mm and above) • Bright finish and conventional point (below 2mm) • DIN 338 • Specially designed 118° Point Angle Specifications …

4 x tungsten carbide cutting edges Double fluted shank increases material removal rate Cuts through hard masonry Fits all SDS Plus machines Features: Tungsten carbide cutting tips for smoother, faster cut and prolonged life. 4 cutting edges penetrate hard masonry materials rapidly. Double fluted shank for efficient waste removal 14 x 210mm Power Tool Accessories Drill Bits Specifications: Dimensions: H:0.0 x W:0.0 x D:0.3 cm Weight: 0.1 kg Colour: Multi Guarantee:6 Months Model Number: TOO-580452

200mm Pilot drill.200mm Pilot Drill• 200mm Pilot drill.• Model No. DDPModel No: DDP:Brand: Worksafe:Nett Weight: 0.1kg:PTDSEADDP

Reisser HSS Roll Forged DIN338 Jobber Drill 118° chisel point tip For drilling metal and plasticHSS Roll Forged DIN338 Jobber Drill3.2mm DiameterOverall length: 65mmTube of 10pcPTDREI241073

Series 1012 HSS-Co Straight Shank High Helix Jobber Drills Metric High helix drills, to drill long-chipping materials like aluminium, aluminium alloys, copper and plastics. Point angle: 130. Helix angle: high. Web thickness: normal. Relief angle: normal. Tolerance of diameter: h8. Tolerance of shank: f11. Manufactured to DIN 338 RN.

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118 point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining. Features and Benefits High speed steel construction for increased tool durability Point angle of 118 for precise holemaking and precision cutting Black oxide coating helps aid chip flow, reduce heat and prevent …

Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel stainless cast iron ceramics plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 4.0mm.Working length: 43mm.Overall length: 75mm.PTDDOR400TIN