Chimneys

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6"

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

The collar attached to this plate houses and supports strips of material which expand when the activation temperature is exceeded. Once the material has expanded to the flue outer casing, the assembly maintains the fire resistance of the structure through which the flue passes. The Ventilated Fire Stop with Fire Sealing Collar is designed to meet the requirements of The Building Regulations 2000 Approved Document B and has been tested to comply with the requirements of BS EN 1856-1.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Known informally as a 'pot hanger cowl' or chimney liner cowl, this great new product from Colt Cowls revolutionises the method of installing a cowl or birdguard onto a flexible flue, negating the removal of the chimney pot when installing. Designed to fit 125mm/5" flexi liner.

Known informally as a 'pot hanger cowl' or chimney liner cowl, this great new product from Colt Cowls revolutionises the method of installing a cowl or birdguard onto a flexible flue, negating the removal of the chimney pot when installing. Designed to fit 150mm/6" flexi liner.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick, whilst extending between 75-350mm. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. The Extension Length comes complete with a special locking band and provides an extension of 75mm to 350mm when slipped over a standard length. This can be used

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

This load bearing Ventilated Support Plate is supplied complete with a support collar and is designed for use where the flue system penetrates a combustable floor. a load bearing support plate must be fitted to every 6 metre run of flue pipe.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. The It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5"

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6"

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6"