Other for Construction

The Moore & Wright 891 Series Adjustable Depth Micrometer features interchangeable depth rods, with a 4mm diameter. These adjustable depth micrometers conform to BS6468:1984. Base Length: 63.5mm / 2.1/2in. The Moore & Wright 891M150 Adjustable Depth Micrometer has the following specification: Range: 0-150mm.Resolution: 0.01mm.Additional Information:• Micrometer Type: Depth• Metric/Imperial: Metric

The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head, a set of extension rods and a spacing collar to facilitate alternative measuring ranges. These models (901, 902 & 903) have detachable extension handles. All models supplied in a fitted case. These 900 Series Internal Micrometers conform to BS959 Standards.The Moore & Wright Internal Micrometer 902M Internal Micrometer has the following specification: Range: 50-210mm.Head Range: 10mm.Additional Information:• Micrometer Type: Internal• Metric/Imperial: Metric• Min. Measurement (mm): 50• Max. Measurement (mm): 210• Graduation (mm): 0.01

The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head, a set of extension rods and a spacing collar to facilitate alternative measuring ranges. These models (901, 902 & 903) have detachable extension handles. All models supplied in a fitted case. These 900 Series Internal Micrometers conform to BS959 Standards.The Moore & Wright Internal Micrometer 903M Internal Micrometer has the following specification: Range: 50-310mm.Head Range: 10mm.Additional Information:• Micrometer Type: Internal• Metric/Imperial: Metric• Min. Measurement (mm): 50• Max. Measurement (mm): 310• Graduation (mm): 0.01

The Moore & Wright CSM Precision Sets are supplied with a rule (graduated both sides), Protractor head, Square head and Centre head. The datum faces are fully hardened and ground to resist wear. There is a centrally mounted protractor vial allows unrestricted viewing and the protractor has full 360° scale plate, graduated 0° - 180° - 0°. The protractor is also fitted with a satin chrome scale plate. The precision rules have been fully hardened and tempered with deeply etched graduations on both sides for ease of reading and long life. It has a unique rule clamp that allows positive location and clamping and a clipped corner on rule to maximise capability Square Head offers the …

The Moore & Wright CSM Precision Rules are fully hardened and tempered precision rules with deeply etched graduations on both sides for ease of reading and long life. Theseare rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12).The Moore & Wright CSRM600 is a 600mm rule is perfect for use with the combination sets and is graduated on both sides. Measurements: mm and 0.5mm on both sides; numbered every 10mm. PLEASE NOTE This is ONLY the Rule.Additional Information:• Gauge Type: Rule

The Moore & Wright Engineer's Levels have a precision ground cast base with a V-groove for location on cylindrical work. Each level is fitted with a main, cross and plumb vial and the main vial is protected by a rotating shroud. The solution in the vials maintains colour and fluidity under all workshop conditions and the main vial has a sensitivity of 1 minute.The Moore & Wright ELM Engineer's Levels has the following specification: Length: 300mm (12in).Width: 36mm (1.42in).Height: 58mm (2.28in).Resoultion: 0.3mm per metre (0.0035in per foot).Additional Information:• Size (mm): 310• Size (in): 12• Resolution (mm): 0.3• Resolution (in): 0.0035

Moore & Wright Engineers Square

Moore & Wright Engineers Square

The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head, a set of extension rods and a spacing collar to facilitate alternative measuring ranges. These models (901, 902 & 903) have detachable extension handles. All models supplied in a fitted case. These 900 Series Internal Micrometers conform to BS959 Standards.The Moore & Wright Internal Micrometer 903 Internal Micrometer has the following specification: Range: 2-12in.Head Range: 0.50in.Additional Information:• Micrometer Type: Internal• Metric/Imperial: Imperial• Min Measurement (in): 2• Max. Measurement (in): 12• Graduation (in): 0.001

The Moore & Wright MW279-01A Micrometer Stand is designed for micrometers up to 100mm (4in). It has a painted cast iron base with plastic covered clamping jaws and the angle of the jaws can be adjusted.Additional Information:• Micrometer Type: Stand

The Moore & Wright 200 Series MW200-01 Analogue External Micrometer has a hammertone finish frame with an insulated grip, a satin chrome scale and tungsten carbide measuring faces. It has a tapered design for easier access to difficult areas. The micrometer has an adjusting key, locking lever and a constant force ratchet for ease of use. It is manufactured to DIN 863/1 standards, and supplied in plastic case. Specification; Range: 0-25mm.Resolution: 0.01mm.Accuracy: 0.004mm.Additional Information:• Micrometer Type: External• Metric/Imperial: Metric• Min. Measurement (mm): 0• Max. Measurement (mm): 25• Graduation (mm): 0.01

The Moore & Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting. The micrometers are manufactured to DIN 863 standards. Specification Range: 0-25mm/0-1in.Resolution: 0.001mm/.00005in.Additional Information:• Micrometer Type: External• Metric/Imperial: Metric & Imperial• Min. Measurement (mm): 0• Max. Measurement (mm): 25• Min …

The Moore & Wright MW521-01 Combination Set is supplied with three measuring heads (square, protractor and centre) which can be attached to the stainless-steel ruler, allowing versatile measurements and marking on various types of workpieces.The stainless-steel rule has engraved graduations; one side metric, one side imperial with hardened and ground slide ways. Range: 180°.Length: 300mm (12in).Additional Information:• Gauge Type: Combination Set

Bahco replaceable, double-edged blades to fit Bahco 625, 650 and 665 scrapers. These carbide-edged blades last up to 50x longer than conventional steel blades. They smooth and remove paint, glue, varnish and rust without the need for heat. The blades have convex ground edges to reduce the risk of scratching surfaces and cut on both the pull and push strokes. Blade Length: 65mBlade Width: 62mm /2.1/2in.Additional Information:• Scraper Type: Blades

Enhance your scraping efficiency with the BAHCO Round Replacement Blade for 625 Ergo™ Scrapers. Designed for seamless compatibility with the BAHCO 625 Ergo™ Scraper handle (sold separately), this round replacement blade offers exceptional performance and durability for a variety of gardening tasks. Whether you´re removing stubborn stickers, cleaning paint from glass, or tackling tough residue on hard surfaces, this blade delivers the precision and power you need.Experience the difference of a razor-sharp edge with the BAHCO Round Replacement Blade. Crafted from high-quality hardened steel, this blade maintains its sharpness even after extended use, ensuring consistent and effective scraping. Its …

Bahco 650 Carbide Edged Power Scraper developed according to the scientific ERGO™ process with a comfotable, two-component handle which provides ample space to scrape with both hands. The scaper is ideal for universal use, regardless of scraping direction. The blade is made of Carbide for easy removal of paint, glue, varnish and rust off various surfaces. Supplied with a 442, 50mm double edged straight blade. Designed to fit both 50 and 62mm blades.Blade length: 50mm.Weight: 170g.Additional Information:• Scraper Type: Multi-Use Scrapers

Bahco 665 Carbide Edged Heavy-Duty Paint Scraper for power scraping of large areas. Developed according to the scientific ERGO™ process, it features a comfortable two-component handle that provides ample space to scrape with both hands. The Slim scraper head offers better access in confined spaces. It is designed for heavy-duty use and the carbide blades allow easy removal of paint, glue, varnish and rust off various surfaces. Supplied with a 441, 65 mm double edged straight blade. Will accept 50 and 62mm blades. Blade length: 65mmWeight: 210gAdditional Information:• Scraper Type: Paint Scrapers

The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps. Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm). Length 600mm

Achieve unparalleled accuracy and efficiency in your leveling tasks with the BAHCO Aluminum Torpedo Level 230 mm. This robust and reliable tool is a must-have for any professional tradesperson or DIY enthusiast, offering exceptional performance and durability in a compact, easy-to-handle design. Perfect for a wide range of applications, from setting shelves and hanging pictures to more complex construction projects, this torpedo level ensures precise measurements every time.The BAHCO Aluminum Torpedo Level 230 mm distinguishes itself through its high-quality construction and innovative features. Crafted from robust aluminum, this level boasts exceptional strength and rigidity, resisting bending …

Bahco drop shape blade to fit the 625 scraper. These blades are made of cemented carbide and can last up to 50 x longer than conventional steel blades. They have superior sharpness, for scraping on wood, metal or concrete.They can be turned 360° in the handle to find different radii or sharp points and are used for scraping on windows, frames and mouldings with different inverted radii. The outer diameter on round section is 17mm (2/3 inch).Weight: 3gAdditional Information:• Scraper Type: Drop Blade• Scraper Width (mm): 80

Pear-shaped replacement blade.Pear-shaped replacement blade for 625 ERGO™ scrapers.Features:- Construction.- Spatulas and scrapers.

These tape measures combine a strong pull magnetic end, reverse blade printing and a metric and imperial scale for superior all round measuring. The body is made of a two component elastomer and ABS, whilst the blade is manufactured from high quality carbon steel with a Nylon coating for durability. Each product possesses patented automatic blade locking for quick and easy measurements and a magnetic s/s tip for ceiling measurement and magnetic pick up. Available in either a 5 or 8m length. Features and Benefits Automatic blade lock improves user safety and accuracy of measuring Both products possess metric and imperial scales for versatility of measuring Blade is manufactured from high …

Bahco replaceable, double-edged blades to fit Bahco 625, 650 and 665 scrapers. These carbide-edged blades last up to 50x longer than conventional steel blades. They smooth and remove paint, glue, varnish and rust without the need for heat. The blades have convex ground edges to reduce the risk of scratching surfaces and cut on both the pull and push strokes. Blade Length: 65mThe mini blade cuts on flat and point for intricate mouldings and detail work. Blade Width: 50 mm /2in.To fit: 440 / 650 only.Additional Information:• Scraper Type: Blades

The Bahco 449 Scraper Blade cuts on flat and point for intricate mouldings and detail work. Convex ground edges to reduce the risk of scratching surfaces. Fits the Bahco 448 and 625 Scraper. Blade Width: 25mmAdditional Information:• Scraper Type: Blades