Climbing Gear

System for securing the karabiner at the end of a rope or tape lanyard. Made out of particularly strong material, it ensures effective protection against abrasion when in contact with the rock.

Description Hanger: - made of steel, for interior uses - hanger anti-rotation system: textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use Easy clipping: - the wide, ergonomic connection hole facilitates carabiner clipping - the width of the hole allows installation of two carabiners at the same time Prevents wear of carabiners: the thickness of the hanger and the rounded edges of the connection hole limit wear of carabiners Available for two bolt diameters (10 and 12 mm) Specifications Material(s): steel References References P36AA 10 Diameter 10 mm Certification(s) EN 795 A Weight

Description Hanger: - made of steel, for interior uses - hanger anti-rotation system: textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use Easy clipping: - the wide, ergonomic connection hole facilitates carabiner clipping - the width of the hole allows installation of two carabiners at the same time Prevents wear of carabiners: the thickness of the hanger and the rounded edges of the connection hole limit wear of carabiners Available for two bolt diameters (10 and 12 mm) Specifications Material(s): steel References References P36AA 12 Diameter 12 mm Certification(s) EN 795 A, EN 959

Accessory cords from 2 to 8 mm diameter conform to the requirements of the UIAA and EN564 You can buy any length of the product by changing it's amount (1=1m)

Main characteristics: specially shaped to be installed onto the XL-D carabiners; it limits the possibility of loading the minor-axis of the carabiner; it can be installed without the use of tools. Attention! Not to be used as a PPE and it is not designed to support any type of load.

Accessory cords from 2 to 8 mm diameter conform to the requirements of the UIAA and EN564 You can buy any length of the product by changing it's amount (1=1m)

Internal rounded edge for reduced wear of carabiners. Directs the carabiner for optimal work on ceilings. Conical washer for better control of torque. Three anti-rotation pins. Optimized surface for full contact.

Standard oval shape suitable for tying in accessories, attaching speed systems etc. The best strength/weight connector on the market, manufactured in France by Peguet. Ideal for any application calling for reliable strength, smallest size and lightest weight. NOTE: Steel maillons are stamped with a “Working Load Limit” (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers. WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done

For its production, high-quality yarns left over during color change in the extrusion process is used. This upcycling helps to reduce waste in the fiber production process. The Chameleon range offers the same great handling and strength you would expect from TEUFELBERGER ropes. Therefore the rope’s color is flexible and changes based on the raw material provided. Features: All-round rope Robust and long-lasting Ecological footprint Flexible colors Braid:  32 Core:  Nylon Cover:  Nylon Standard:  EN 1891 A Diameter:  10.5 mm Weight[g/m]:  72 Shrinkage [%]:  4

Description Designed to promote loading of the carabiner on the major axis and to limit the risk of rotation Keeps the device or lanyard integrated with the connector, limiting the risk of losing them Compatible with OK, Am’D, WILLIAM, OXAN, VULCAN, Bm'D carabiners and the ROLLCLIP A pulley carabiner Specifications Material(s): nylon Weight: 10 g

For its production, high-quality yarns left over during color change in the extrusion process is used. This upcycling helps to reduce waste in the fiber production process. The Chameleon range offers the same great handling and strength you would expect from TEUFELBERGER ropes. Therefore the rope’s color is flexible and changes based on the raw material provided. Features: All-round rope Robust and long-lasting Ecological footprint Flexible colors Braid: 32 Core: Nylon Cover: Nylon Standard: EN 1891 A Diameter: 11 mm Weight[g/m]: 75 Shrinkage [%]: 4

Accessory cords from 2 to 8 mm diameter conform to the requirements of the UIAA and EN564 You can buy any length of the product by changing it's amount (1=1m)

NLG Tether Rings™ are an economical solution for creating a tether point on a tool that has a captive hole. Shaped tools, such as spanners, are also particularly suited to this type of attachment as the Tether Rings™ move freely along the length of the tool and allows the tool to rotate through 360 degrees. Quick and simple to apply, the NLG Tether Ring™ only requires a pair of pliers to open and wind onto the tool in a similar manner as a key ring. The NLG Tether Rings™ are specially coated to prevent corrosion and will provide a dependable tether point for the harshest working environments. Cost effective tether point for broad range of tools Straightforward

NLG Tether Rings™ are an economical solution for creating a tether point on a tool that has a captive hole. Shaped tools, such as spanners, are also particularly suited to this type of attachment as the Tether Rings™ move freely along the length of the tool and allows the tool to rotate through 360 degrees. Quick and simple to apply, the NLG Tether Ring™ only requires a pair of pliers to open and wind onto the tool in a similar manner as a key ring. The NLG Tether Rings™ are specially coated to prevent corrosion and will provide a dependable tether point for the harshest working environments. Cost effective tether point for broad range of tools Straightforward

NLG Tether Rings™ are an economical solution for creating a tether point on a tool that has a captive hole. Shaped tools, such as spanners, are also particularly suited to this type of attachment as the Tether Rings™ move freely along the length of the tool and allows the tool to rotate through 360 degrees. Quick and simple to apply, the NLG Tether Ring™ only requires a pair of pliers to open and wind onto the tool in a similar manner as a key ring. The NLG Tether Rings™ are specially coated to prevent corrosion and will provide a dependable tether point for the harshest working environments. Cost effective tether point for broad range of tools Straightforward

It secures the lower carabiner of the quickdraw to the sling, preventing the accidental rotation and keeps it on the axis. It also protects the sling from wear and tear. Model Ref. No. Sling width Weight Colour FIXIT S 6V8231003 10 ÷ 13 mm 2 g blue 6V8231005 10 ÷ 13 mm 2 g black 6V8231009 10 ÷ 13 mm 2 g green FIXIT L 6V8231603 15 ÷ 18 mm 4 g blue 6V8231605 15 ÷ 18 mm 4 g black 6V8231609 15 ÷ 18 mm 4 g green

QUICKDRAW SLING 16 mm / C2085 Sling for a quickdraw set   light and strong available in five different lengths Color black Weight 12 g (11 cm) • 0.42 oz (4.4 in) Material polyamide Strength 22 kN Width 16 mm Length 11, 13, 16, 20 and 30 cm (4.4 , 5.2, 6.4, 8 and 12 in)

It secures the lower carabiner of the quickdraw to the sling, preventing the accidental rotation and keeps it on the axis. It also protects the sling from wear and tear. Model Ref. No. Sling width Weight Colour FIXIT S 6V8231003 10 ÷ 13 mm 2 g blue 6V8231005 10 ÷ 13 mm 2 g black 6V8231009 10 ÷ 13 mm 2 g green FIXIT L 6V8231603 15 ÷ 18 mm 4 g blue 6V8231605 15 ÷ 18 mm 4 g black 6V8231609 15 ÷ 18 mm 4 g green

QUICKDRAW SLING 16 mm / C2085 Sling for a quickdraw set   light and strong available in five different lengths Color black Weight 12 g (11 cm) • 0.42 oz (4.4 in) Material polyamide Strength 22 kN Width 16 mm Length 11, 13, 16, 20 and 30 cm (4.4 , 5.2, 6.4, 8 and 12 in)

Triangular shape normally used for attaching main paraglider lines to risers or sometimes used in tow releases. Also suitable for 3 point load. The best strength/weight connector on the market, manufactured in France by Peguet. Ideal for any application calling for reliable strength, smallest size and lightest weight. NOTE: Steel maillons are stamped with a “Working Load Limit” (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers. WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly

As the ultimate rope when it comes to versatility, the VIRUS 10 works with the majority of belay devices and in all conditions. Its diameter, which is neither too thick nor thin, improves control and durability. Gamme Active line Standard EN 892 Type Single rope Impact force 7.6 KN Number of falls 8 Extension during the first fall 35% Sheath percentage 37% Weight per metre 63 g Sharp edge strenght -

QUICKDRAW SLING 16 mm / C2085 Sling for a quickdraw set   light and strong available in five different lengths Color black Weight 12 g (11 cm) • 0.42 oz (4.4 in) Material polyamide Strength 22 kN Width 16 mm Length 11, 13, 16, 20 and 30 cm (4.4 , 5.2, 6.4, 8 and 12 in)

It secures the lower carabiner of the quickdraw to the sling, preventing the accidental rotation and keeps it on the axis. It also protects the sling from wear and tear. Model Ref. No. Sling width Weight Colour FIXIT S 6V8231003 10 ÷ 13 mm 2 g blue 6V8231005 10 ÷ 13 mm 2 g black 6V8231009 10 ÷ 13 mm 2 g green FIXIT L 6V8231603 15 ÷ 18 mm 4 g blue 6V8231605 15 ÷ 18 mm 4 g black 6V8231609 15 ÷ 18 mm 4 g green

It secures the lower carabiner of the quickdraw to the sling, preventing the accidental rotation and keeps it on the axis. It also protects the sling from wear and tear. Model Ref. No. Sling width Weight Colour FIXIT S 6V8231003 10 ÷ 13 mm 2 g blue 6V8231005 10 ÷ 13 mm 2 g black 6V8231009 10 ÷ 13 mm 2 g green FIXIT L 6V8231603 15 ÷ 18 mm 4 g blue 6V8231605 15 ÷ 18 mm 4 g black 6V8231609 15 ÷ 18 mm 4 g green