Cooling Systems Accessories

16 piece bag of 6-32 30mm screws for attaching fans to XSPC radiators.

The ATX bridge tool allows you to start the PSU without the motherboard being connected to the PSU. The tool will fit both 20 and 24pin ATX power supplies.

A set of twenty (20) spare 6mm long screws for EK-Quantum Surface S, P, and X series radiators.Recommended for mounting the EK-Quantum Surface radiators directly to the case or through an open frame fan.Specifications:- Thread: M4- Screw length: 6mm- Head type: Phillips

DetailsEK-ATX Bridging Plug (24 pin)- Ideal for use with 12v Water Pumps to power up without mainboard power.- Fits 24 Pin ATX PSU's

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The pipe is all white so it blends in perfectly with white builds. It gives your water cooling circuit a unique look.The 500 mm long tube has an outer diameter of 12 mm and an inner diameter of 8 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: White- Outer Diameter: 12mm- Inner Diameter: 8mm- Length: 500 mm- Compatibility: Connections with 12 mm outside diameter

Replacement inner O-ring gaskets for EK Hard Tube Compression (HDC) 14mm OD fittings.The package contains 6 pieces of OR 14,1x1,6 NBR70.These O-ring gaskets are compatible with the following fitting lines:EK-Quantum Torque HDC 14EK-Classic HDC 14

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 12 mm and an inner diameter of 8 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 12mm- Inner Diameter: 8mm- Length: 500 mm- Compatibility: Connections with 12 mm outside diameter

Features:- Bitspower OD14mm hard tube- Cut in 500mm length- RoHS Compliant.- Dimension ( FxH ) : 14 x 500 MM. ( +/-3%)

This Tubing will aid you when trying to get that smooth bend in your acrylic tubing. Insert this tube when heating up the acrlic to ensure you get the bend you want and without kinks. Features: - Easy To Use. - Only Compatible With Bitspower Hard Tube Series. - Is Extremely Heat Resistant. - RoHS Compliant.

EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. The fitting is made of nickel-plated CNC-machined brass. These fittings are guaranteed to be compatible with all other EK Water Blocks liquid cooling …

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 14 mm and an inner diameter of 10 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 14mm- Inner Diameter: 10mm- Length: 500 mm- Compatibility: Connections with 14 mm outside diameter

Replacement outer O-ring gaskets for EK fittings and angled adapters.Package contains 6 pieces of OR 12x2.These fittings are compatible with following fitting lines: EK-HDC 16mm EK-ACF 10/13mm EK-ACF 10/16mm EK-ACF 13/19mm EK-ACF 12/16mm EK-HD Adapter 12/16mm EK-Coolstream extenders EK-ACF 10/16mm

The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while …

The Bitspower None Chamfer PETG Link Tube is a solid tube and is used to connect multiple VGA water cooling blocks or other watercooling components. The 500 mm long tube having an inner diameter of 11 mm, while the outer diameter is 14 mm. It consists of PETG (polyethylene terephthalate), a plastic material, as it is also used for the known PET bottles. It has a particularly high stability, high resistance to breakage, which greatly facilitates the processing of custom water cooling. Features: - Only Compaible With Bitspower Fitting EML Series. - Pure PETG Material. - Durable And Strength Performance. - RoHS Compliant.

Connecting individual water-cooling components requires extra attention to detail in regards to choosing the correct fittings as well as the correct number. Assembling a cooling loop with the incorrect fittings to hand or not enough of them can quickly turn into a frustrating experience - as well as holding up your build. This is an adapter in black used for extending connections within water-cooling loops. The adapter is a coupling that connects two hard tubes with outer diameters of 16 mm at a 45 degree angle. The sleeve nuts are made of aluminium and utilise two rubber rings to ensure a watertight seal.Specification:Material: Aluminium, BrassColour: BlackAngle: 45 DegreesFittings: 2x Ø …

EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. The fitting is made of CNC-machined brass with satin-black finish. Black Quantum Torque series fittings are intentionally not painted on the inside to …

Mayhems 1.1 Meter Silicone Bending Cord 9.5mm OD for 10mm Petg and Acrylic Hard tubing Extreme temperatures -40°C to +200°C. Good electrical resistance and insulation properties.FDA approved Silicone rubber cord is the preferred Perfect for bending PETG and Acrillic Hard Tubing.Tolerance of +/- 1mmSpecification:- Colour: White- Material: Silicone (VMQ)- Cross Section Type: Circular- Hardness (Shore A): 60- Maximum Temperature (°C): 200- Minimum Temperature (°C): -40- Elongation at break (%): 590- Tensile Strength (MPa): 10.5- Compression Set (%): 20

The EK-HD PETG Inserts are EK's way of battling against potential hazards that the use of PETG tubes present. PETG tubes are extremely popular because of the ease of use and their flexibility. On the other hand, PETG tubing is prone to deformation when exposed to high temperatures (40°C and above). The deformation rate depends on the duration and maximum temperature reached. These temperatures can be reached with pump failures, water block clogging, etc. The EK-HD PETG Inserts provide a safety measure for 16mm OD / 12mm ID PETG tubes which prevents the tube wall from collapsing inside the compression fitting. The EK-HD PETG Insert is low profile and it is not visible when in use with …

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 12 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color: BlackConnections:- External thread: G1/4 inch- Hard tube: 12 mm outer diameter (OD)

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 16 mm and an inner diameter of 12 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: White- Outer Diameter: 16mm- Inner Diameter: 12mm- Length: 500 mm- Compatibility: Connections with 16 mm outside diameter

The EK-HD PETG Inserts are EK's way of battling against potential hazards that the use of PETG tubes present. PETG tubes are extremely popular because of the ease of use and their flexibility. On the other hand, PETG tubing, especially the thin tube wall models (10/12) are prone to deformation when exposed to high temperatures (40°C and above). The deformation rate depends on the duration and maximum temperature reached. These temperatures can be reached with pump failures, water block clogging, etc. The EK-HD PETG Inserts provide a safety measure for 12mm OD / 10mm ID PETG tubes which prevents the tube wall from collapsing inside the compression fitting. The EK-HD PETG Insert is low …

EK-Loop Bending Cord for 10mm ID Hard Tube - 0.33m is a silicone cord for bending acrylic and PETG tubing. It features high heat and abrasion resistance, helping the tube not to deform while subjected to the high temperatures of a heat gun during the bending process. Using a heat gun and the enclosed silicone bending cord (insert), it is possible to make customized pieces of solid tubing. Use the hacksaw to cut pieces to length and sandpaper to chamfer and smooth out the edges. For a perfect chamfer, EK recommends the use of the EK-HD Tube Reamer tool. EK-Loop Bending Cord is 0.33m long. It is made of flexible silicone with high elasticity, allowing it to be inserted and pulled out of a bent …

Spare Reservoir Holder made from POM Acetal for cylindrical reservoirs 60mm in diameter.Grip can be adjusted by side-positioned screw.May be used on EK-Multioption RES X2 and EK-RES X3 reservoirs as well as 3rd party product.Contents:- Holder (2x)- Mounting mechanism

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.- Triple O-Ring Seal- Material: Brass- Finish: Black Chrome- For 14mm OD Rigid Tubing- G1/4" Thread- Easy tool free installation Only for use with XSPC 14mm PETG and Rigid Tubing Fittings