Cooling Systems Accessories

This Tubing will aid you when trying to get that smooth bend in your acrylic tubing. Insert this tube when heating up the acrlic to ensure you get the bend you want and without kinks. Features: - Easy To Use. - Only Compatible With Bitspower Hard Tube Series. - Is Extremely Heat Resistant. - RoHS Compliant.

To connect the individual components of the water cooling system, it is essential to choose the right connections and their sufficient number. Otherwise the installation quickly becomes a frustrating experience if the assembly fails due to the wrong or too few connectors and is delayed as a result.Bitspower offers a comprehensive range, which has the right solution for every requirement - whether adapter, direct hose connections, elbow or distributor.This is an adapter for connecting acrylic tubes in a water cooling circuit. The in-house Crystal Link Tubes are particularly suitable for this and can be used, for example, to connect two graphics cards and bridge the distance between the two accordingly.…

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.- Triple O-Ring Seal- Material: Brass- Finish: Matte Black Electroplated- For 14mm OD Rigid Tubing- G1/4" Thread- Easy tool free installation

EK-Loop Bending Cord for 10mm ID Hard Tube - 0.33m is a silicone cord for bending acrylic and PETG tubing. It features high heat and abrasion resistance, helping the tube not to deform while subjected to the high temperatures of a heat gun during the bending process. Using a heat gun and the enclosed silicone bending cord (insert), it is possible to make customized pieces of solid tubing. Use the hacksaw to cut pieces to length and sandpaper to chamfer and smooth out the edges. For a perfect chamfer, EK recommends the use of the EK-HD Tube Reamer tool. EK-Loop Bending Cord is 0.33m long. It is made of flexible silicone with high elasticity, allowing it to be inserted and pulled out of a bent …

Connecting individual water-cooling components requires extra attention to detail in regards to choosing the correct fittings as well as the correct number. Assembling a cooling loop with the incorrect fittings to hand or not enough of them can quickly turn into a frustrating experience - as well as holding up your build. This is a chrome-plated adapter used for extending connections within water-cooling loops. This is a chrome-plated adapter used to extend connections within a water-cooling loop. The adapter is a coupling for connecting two hard tubes with 16 mm outer diameters at a 45 degree angle. The sleeve nuts are made from aluminium and two rubber rings ensure a watertight seal.Specification:Material: …

Spare Reservoir Holder made from POM Acetal for cylindrical reservoirs 60mm in diameter.Grip can be adjusted by side-positioned screw.May be used on EK-Multioption RES X2 and EK-RES X3 reservoirs as well as 3rd party product.Contents:- Holder (2x)- Mounting mechanism

The Bitspower None Chamfer PETG Link Tube is a solid tube and is used to connect multiple VGA water cooling blocks or other watercooling components.The 1000 mm long tube having an inner diameter of 10 mm, while the outer diameter is 12 mm. It consists of PETG (polyethylene terephthalate), a plastic material, as it is also used for the known PET bottles. It has a particularly high stability, high resistance to breakage, which greatly facilitates the processing of custom water cooling.Features: - Only Compaible With Bitspower Fitting EML Series.- Pure PETG Material.- Durable And Strength Performance.- RoHS Compliant.

EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. The fitting is made of CNC-machined brass with high-quality satin silver finish. Satin Titanium Quantum Torque series fittings are intentionally not painted …

Mayhems bespoke laboratory grade, hand blown and hardened glass tubing are made in the UK to the highest possible standards. Developed from the ‘ground up’, Mayhems Laboratories have taken the concept of ‘Glass Like’ to the extreme and utilised local knowledge within the UK to produce hardened tubing for liquid-cooled PC’s. The size of the tubing conforms to standard sizes that are common within the industry today. Mayhems tubing is fully compatible with other popular fittings from Primochill, Bitspower, EKWB and other popular watercooling fittings. Mayhems Borosilicate Glass Tube tubing has been stress tested beyond ‘normal’ temperatures (100c+) and tested with all Mayhems coolantsWarningUse appropriate sa…

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 16 mm and an inner diameter of 12 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 16mm- Inner Diameter: 12mm- Length: 500 mm- Compatibility: Connections with 16 mm outside diameter

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.- Triple O-Ring Seal- Material: Brass- Finish: Black Chrome- For 14mm OD Rigid Tubing- G1/4" Thread- Easy tool free installation Only for use with XSPC 14mm PETG and Rigid Tubing Fittings

Selecting the correct choice and number of connectors for individual water cooling components is essential, if this stage goes awry the experience can quickly become one beset with delays and frustration. Phanteks offers a comprehensive range of connectors that provide the perfect solution whatever the requirement - whether it be adapters, tubing or angled-fittings. The design is solid and comes with sealing rings. This allows connectors to remain water resistant and provide long term durability. This is a premium edition black stop-fitting with knurled edges for improved grip and a G1/4" thread. This allows unneeded temporary or long term openings to be blocked off, such as unused ports on …

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.- Triple O-Ring Seal- Material: Brass- Finish: Chrome- For 14mm OD Rigid Tubing- G1/4" Thread- Easy tool free installation Only for use with XSPC 14mm PETG and Rigid Tubing Fittings

Mayhems 1.1 Meter Silicone Bending Cord 12.7mm OD for 13mm Petg and Acrylic Hard tubing Extreme temperatures -40°C to +200°C. Good electrical resistance and insulation properties.FDA approved Silicone rubber cord is the preferred Perfect for bending PET-G and Acrillic Hard Tubing.Tolerance of +/- 1mmSpecification:- Colour: White- Material: Silicone (VMQ)- Cross Section Type: Circular- Hardness (Shore A): 60- Maximum Temperature (°C): 200- Minimum Temperature (°C): -40- Elongation at break (%): 590- Tensile Strength (MPa): 10.5- Compression Set (%): 20

The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while …

EK-Loop Connect Level Sensor TBE 60 is a coolant level sensor provides a warning when the reservoir reaches a point where it would be prudent to top it off. Due to the coolant evaporation through the tubing, it makes sure the pump never runs dry. Also, in case of a leak, it warns you of the coolant level being below its optimal value.It attaches to the tube of the EK tubular-style reservoirs with 60mm diameter and connects via a dedicated cable to the EK-Loop Connect control unit.Technical Specifications:- Connectors: 4-pin- Length: 50cm

With this Barrow tube cutter you can easily cut soft and hard tubes to fit. The hose cutter is suitable for straight and clean cuts without compromise. This tool makes it easier for you to build your new water-cooled system and brings you a step closer to your perfect gaming PC.Technical details:- Color white- Material: plastic (handle), steel (blade)- Compatibility: PVC and PETG tubes (soft/hard tubes)

The EK-RES X3 TOP WHITE is an replacement white top end cap for EK-RES X3 series reservoirs and other RES X3 based parts.EK-RES X3 TOP WHITE is made of quality machined POM Acetal material.Contents:- EK-RES X3 TOP WHITE- including sealing gasket (o-ring / OR 52x2.5)Compatibility:This spare part is compatible with the following EK reservoirs:- EK-RES X3 110- EK-RES X3 150- EK-RES X3 250- EK-RES X3 400- EK-DDC X-RES CSQ- EK-D5 X-RES CSQPlease note:- G 1/4 plug to close the port is no enclosed.- Allen key 6mm, required for tightening of G1/4 plugs, is not enclosed. It is however being enclosed within each delivery of the EK-RES X3 series reservoirs.Made in Slovenia - EU!

To connect the individual components of the water cooling system, it is essential to choose the right connections and their sufficient number. Otherwise the installation quickly becomes a frustrating experience if the assembly fails due to the wrong or too few connectors and is delayed as a result.Bitspower offers a comprehensive range, which has the right solution for every requirement - whether adapter, direct hose connections, elbow or distributor.This is an adapter for connecting acrylic tubes in a water cooling circuit. The in-house Crystal Link Tubes are particularly suitable for this and can be used, for example, to connect two graphics cards and bridge the distance between the two accordingly.…

XSPC PETG tubing is highly transparent and the 2mm wall thickness makes the tubing easier to bend without kinking. Each pack contains two 50cm lengths. Specification: - High Transparancy - Outer Diameter: 14mm - Inner Diameter: 10mm - Wall Thickness: 2mm - Length: 2x 50cm - Material: PETG Only for use with XSPC PETG fittings

The new Eiszapfen PRO HardTube fittings from Alphacool are a further development of the well-known, previous Eiszapfen. When developing the fittings, Alphacool focused specifically on one particular problem: the deformation of PETG hard tubes at high temperature. These can deform at 60 ° C. Although such a temperature is rarely reached, it can still occur. The Eiszapfen PRO prevent this problem from the outset and keep the tubes in position. Deformation is prevented by the new nylon inserts on the inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which ensures a better …

EK-Quantum Torque Micro HDC 12 - Black is a premium 12mm fitting made for solid tubing, such as acrylic, PETG, and brass. A much smaller footprint will allow tube placement in places where a regular fitting would be too large or inconvenient. It was named Micro due to an installed height of only 11.5mm, which is 23% shorter than standard Torque HDC 12 fittings. The outer diameter of the fitting is also significantly smaller than its bigger brother, with only 16mm across the fitting. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro compression ring. The fitting is made of CNC-machined brass with a satin black finish. The surface of the fitting is smooth …

With Alphacool's convenient Core 1000ml fill bottle, a water cooling system can be filled easily, uncomplicatedly and precisely even in the tightest system. The cooling liquid is filled directly into the reservoir via the flexible and narrow pipe. With the empty bottle, it is also possible to remove coolant out of the expansion tank. The large opening with screw cap makes it easy to fill the bottle. Technical data Material PE-LD Capacity 1000 ml Color clear

The XSPC Professional PETG Deburing Tool kit was developed as an upgraded replacement for the older manual hand held debur tool. The best thing is they are a very similar price. Speed and accuracy are improved with our new rotary tool, and can proudly sit amongst your modding tools for future builds. Simply lock the tool in a battery drill chuck, and spin for a few seconds while feeding the PETG into the tool, for a speedy and accurate chamfer. Then use the provided sand paper to smooth off the end before putting the tube to use in your new build.Details- Fast and efficient way of deburing your PETG tubing- Also effective on Stainless Steel, Mild Steel, Copper, Brass, Aluminium, Fiberglass and …