Door Hinges

Feature: 1. It is replacement for Chevrolet Silverado 1500, 2500, 3500 1999?2007, and replacement for GMC Sierra 1500, 2500, 3500 1999?2007. 2. Its OE numbers are 15074252, 15074253, 15078745, 1507874 more→6, 38642. 3. High quality material, it is made of durable aluminum alloy, stable and sturdy, designed to withstand extreme weather and durable wear. 4. Easy to replace, it is specially designed to perfectly match your pickup truck without drilling or modifying the body. 5. Pack of 4, it has four tailgate hinges and can be installed with original or current hardware. Specification: Item Type: Tailgate Hinge Part Number: 15074252, 15074253, 15078745, 15078746, 38642 Material: Aluminum Alloy Process: …

Feature: Made of high quality 304 stainless steel, corrosionproof, more durable Thickened steel plate, capable of bearing heavier equipment. Suitable for yachts, campers, outdoor trailers. Strict test more→of repeated open and close, quality assurance. Good corrosion resistance, used in marine equipment, longer service life. Specification: Material: 304 Stainless steel Type: 40*40mm(Small), 50*50mm(Middle), 60*60mm(Big) (Optional ) Product dimension: Small: 40*40mm 1.6*1.6in Middle: 50*50mm 2.0*2.0in Big: 60*60mm 2.4*2.4in Application: Camping car, Outdoor trailer, Yacht Package list: 1 * Hinge Note: The actual product color may deviate from the photo due to light. There may be a slight deviation …

Ideal for use on fieldgates and driveway gates that are to be hung on timber, concrete or masonry posts. The hinge set provides exceptional support to the gate as the top band wraps around the gate an more→d are fixed with cup square bolts to firmly secure in place. The bottom fitting clamps around the heel of the gate and is adjustable to allow for easy gate alignment after fitting. This is particularly useful when hanging pairs of gates. ?Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. Fixings included. Hook to bolt features a 9mm drilled hole for R clips or linch pins (not included) to be fitted to prevent …

Ideal for use on fieldgates and driveway gates that are to be hung on timber, concrete or masonry posts. The hinge set provides exceptional support to the gate as the top band wraps around the gate an more→d are fixed with cup square bolts to firmly secure in place. The bottom fitting clamps around the heel of the gate and is adjustable to allow for easy gate alignment after fitting. This is particularly useful when hanging pairs of gates. ?Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. Fixings included. Hook to bolt features a 9mm drilled hole for R clips or linch pins (not included) to be fitted to prevent …

Ideal for use on fieldgates and driveway gates that are to be hung on timber posts. The hinge set provides exceptional support to the gate as the top band wraps around the gate and are fixed with cup more→square bolts to firmly secure in place. The bottom fitting clamps around the heel of the gate and is adjustable to allow for easy gate alignment after fitting. This is particularly useful when hanging pairs of gates. ?Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. Fixings included. Hook to bolt features a 9mm drilled hole for R clips or linch pins (not included) to be fitted to prevent the gate being lifted …

Ideal for use on fieldgates and driveway gates that are to be hung on timber posts. The hinge set provides exceptional support to the gate as the top band wraps around the gate and are fixed with cup more→square bolts to firmly secure in place. The bottom fitting clamps around the heel of the gate and is adjustable to allow for easy gate alignment after fitting. This is particularly useful when hanging pairs of gates. ?Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. Fixings included. Hook to bolt features a 9mm drilled hole for R clips or linch pins (not included) to be fitted to prevent the gate being lifted …

Ideal for use on fieldgates and driveway gates that are to be hung on timber posts. The hinge set provides exceptional support to the gate as the top band wraps around the gate and are fixed with cup more→square bolts to firmly secure in place. The bottom fitting clamps around the heel of the gate and is adjustable to allow for easy gate alignment after fitting. This is particularly useful when hanging pairs of gates. ?Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. Fixings included. Hook to bolt features a 9mm drilled hole for R clips or linch pins (not included) to be fitted to prevent the gate being lifted …

Ideal for securing light duty loads during transit or storage. Endless design without hooks. Tested to EN 12195-2" Length metre: 5 Width mm: 25 Break Strength kg: 1000 Lashing Capacity kg: N/A Safe Wo more→rking Load kg: 500 Type: Light Duty Hook Type: No Hook Material: Polyester Colour: Red

Performance ball raced hinges are made to the highest specification from solid drawn brass and brass pins to guarantee no rust and a long lasting finish. They are ideal for heavy high quality doors in more→domestic applications. Featuring 4 ball bearing raced knuckles to prevent knuckle wear and provide a lifetime of silent, smooth door operation. Fixings included. Size L x W mm: 102 x 76 Knuckle Dia. mm: 12.8 Hole Dia. mm: 5.5 Thickness mm: 3.00 Knuckle Type: Ball Bearing Corner Type : N/A Material: Solid Brass Finish: BronzeSize 102 x 76 - 2 Pieces

Ideal for heavy weight high use gates, sheds and garage doors in domestic applications. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings incl more→uded. Band Length inch: 18 Band Length mm: 450 Band Thickness mm: 2.8 Knuckle Dia. mm: 14.0 Leaf Size L x W mm: 150 x 30 Material: Carbon Steel Finish: Hot Dipped Galvanised Max Gate Weight kg: 80 To Suit Gate Width mm: 900: 1350

Ideal for heavy weight high use gates, sheds and garage doors in domestic applications. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings incl more→uded. Band Length inch: 18 Band Length mm: 450 Band Thickness mm: 2.8 Knuckle Dia. mm: 14.0 Leaf Size L x W mm: 150 x 30 Material: Carbon Steel Finish: Epoxy Black Max Gate Weight kg: 80 To Suit Gate Width mm: 900: 1350

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 900 Band Length inch: 36 Band Thickness mm: 5.4 Type: Straight Material: Carbon Steel Finish: Hot Dipped GalvanisedSize 900mm - 2 Pieces

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 750 Band Length inch: 30 Band Thickness mm: 5.4 Type: Straight Material: Carbon Steel Finish: Hot Dipped GalvanisedSize 750mm - 2 Pieces

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 600 Band Length inch: 24 Band Thickness mm: 5.4 Type: Straight Material: Carbon Steel Finish: Hot Dipped GalvanisedSize 600mm - 2 Pieces

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 500 Band Length inch: 20 Band Thickness mm: 4.8 Type: Straight Material: Carbon Steel Finish: Hot Dipped GalvanisedSize 500mm - 2 Pieces

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 450 Band Length inch: 18 Band Thickness mm: 4.8 Type: Straight Material: Carbon Steel Finish: Hot Dipped GalvanisedSize 450mm - 2 Pieces

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 250 Band Length inch: 10 Band Thickness mm: 4.8 Type: Straight Material: Carbon Steel Finish: Hot Dipped GalvanisedSize 250mm - 2 Pieces

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 900 Band Length inch: 36 Band Thickness mm: 5.4 Type: Straight Material: Carbon Steel Finish: Epoxy Black

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 750 Band Length inch: 30 Band Thickness mm: 5.4 Type: Straight Material: Carbon Steel Finish: Epoxy Black

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 600 Band Length inch: 24 Band Thickness mm: 5.4 Type: Straight Material: Carbon Steel Finish: Epoxy Black

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 450 Band Length inch: 18 Band Thickness mm: 4.8 Type: Straight Material: Carbon Steel Finish: Epoxy Black

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 350 Band Length inch: 14 Band Thickness mm: 4.8 Type: Straight Material: Carbon Steel Finish: Epoxy Black

The straight pattern hook and band hinges are for hanging the door or gate in front of the frame or post. They are ideal for heavy weight, high use doors, gates, garages and stables in domestic and ag more→ricultural applications. Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent warping. Fixings included. Band Length mm: 250 Band Length inch: 10 Band Thickness mm: 4.8 Type: Straight Material: Carbon Steel Finish: Epoxy Black

Ideal for heavy weight high use gates and shed doors in domestic, commercial and agricultural applications. NOTE: Doors/gates over 2130mm / 7ft height, should be fitted with a third hinge to prevent w more→arping. Fixings not included. Band Length inch: 24 Band Length mm: 600 Band Thickness mm: 3.0 Knuckle Dia. mm: 16.0 Leaf Size L x W mm: 175 x 55 Material: Carbon Steel Finish: Hot Dipped Galvanised Max Gate Weight kg: 100 To Suit Gate Width mm: 1200: 1800