Zerix ELW09-EP (ZX2808)
 | Outdated Product Reliable Czech flowing electric water heater of low power with a thermostat and a display showing the current water temperature. It is made in the form of a faucet, completely ready for installation on a sink or sink. It is positioned as a product of the middle price category of 2020, which can become a convenient source of hot or warm water in a city apartment, in a country house, in an office or workshop. Installing a Zerix ELW09-EP instantaneous electric water heater is a simple, intuitive and well-described procedure in the complete manual. Therefore, many users will be able to handle it on their own. The device is designed for connection to a household network with a voltage of 220 V and consumes current up to 14 A. Therefore, to connect the water heater, you will need high-quality co...pper wires with a cross section of at least 2 sq. mm. Unlike storage water heaters, which enter the mode no faster than in 15-20 minutes, such an apparatus provides the desired water temperature in 25-30 seconds. The capacity of this flow heater is up to 2.5 l/min, provided that the temperature difference between inlet and outlet is 25 °C (or 1.5 l/min for a difference of 40 °C). The maximum temperature of hot water is limited to 60 ° C and it is completely safe (does not cause thermal burns to the skin). The built-in residual current device will prevent dangerous current leakage. |
 |
Zerix ELW09-EP | ||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||
Reliable Czech flowing electric water heater of low power with a thermostat and a display showing the current water temperature. It is made in the form of a faucet, completely ready for installation on a sink or sink. It is positioned as a product of the middle price category of 2020, which can become a convenient source of hot or warm water in a city apartment, in a country house, in an office or workshop.
Installing a Zerix ELW09-EP instantaneous electric water heater is a simple, intuitive and well-described procedure in the complete manual. Therefore, many users will be able to handle it on their own. The device is designed for connection to a household network with a voltage of 220 V and consumes current up to 14 A. Therefore, to connect the water heater, you will need high-quality copper wires with a cross section of at least 2 sq.
mm. Unlike storage water heaters, which enter the mode no faster than in 15-20 minutes, such an apparatus provides the desired water temperature in 25-30 seconds. The capacity of this flow heater is up to 2.5 l/min, provided that the temperature difference between inlet and outlet is 25 °C (or 1.5 l/min for a difference of 40 °C). The maximum temperature of hot water is limited to 60 ° C and it is completely safe (does not cause thermal burns to the skin). The built-in residual current device will prevent dangerous current leakage.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Zerix 2025 - new arrivals, bestsellers, and the most relevant models Zerix.
- cable length 1.2 m
- connection diameter 3/4"
