Xilence Red Wing R7 XP400R7
 | Expecting restock This power supply is primarily suitable for mid-range computer systems — it can be equipped with a high-quality computer that is used to solve simple everyday tasks or an office model. Also, Xilence Red Wing R7 XP400 can be used when completing office PCs. This block received a memorable design performance. The wire block is stationary, that is, non-removable. The device has a wiring with 3 SATA connectors and 1 — IDE. In addition, there is also 1 PCI-E connector, which allows you to power a dedicated graphics card with a 6-pin connection. The connector for connecting the motherboard has a 20 + 4 circuit, and the CPU is connected with a 4-pin connector. The cooling system is represented by a fairly powerful fan with an impeller of 120 mm in diameter. To increase the reliability of the unit..., the manufacturer has equipped the device with overvoltage and overcurrent protection. There is also short circuit protection. The device is designed for installation in ATX form factor cases. The maximum power is 400W. The model has an optimal balance of price and quality, it is one of the most affordable PSUs for completing a computer with average performance. |
 |
Close
Xilence Red Wing R7 XP400R7 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||
This power supply is primarily suitable for mid-range computer systems — it can be equipped with a high-quality computer that is used to solve simple everyday tasks or an office model. Also, Xilence Red Wing R7 XP400 can be used when completing office PCs. This block received a memorable design performance. The wire block is stationary, that is, non-removable. The device has a wiring with 3 SATA connectors and 1 — IDE.
In addition, there is also 1 PCI-E connector, which allows you to power a dedicated graphics card with a 6-pin connection. The connector for connecting the motherboard has a 20 + 4 circuit, and the CPU is connected with a 4-pin connector. The cooling system is represented by a fairly powerful fan with an impeller of 120 mm in diameter. To increase the reliability of the unit, the manufacturer has equipped the device with overvoltage and overcurrent protection. There is also short circuit protection. The device is designed for installation in ATX form factor cases. The maximum power is 400W. The model has an optimal balance of price and quality, it is one of the most affordable PSUs for completing a computer with average performance.
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Xilence 2025 - new arrivals, bestsellers, and the most relevant models Xilence.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Xilence 2025 - new arrivals, bestsellers, and the most relevant models Xilence.
Model overview based on user reviews
The Xilence Red Wing R7 series offers a range of budget-friendly power supply units suitable for basic and office systems. Users appreciate the affordable price and quiet operation of these PSUs, making them a decent choice for systems with moderate power demands. However, several reviews highlight concerns about the actual power output not meeting the advertised specifications, with some units struggling under higher loads and causing system reboots. The cable length and quality are generally acceptable, though some users noted issues with cable fit and durability. The build quality, including the paint job and internal components, has been criticized, with reports of short service life and components failing shortly after the warranty period. Overall, while the Xilence Red Wing R7 series can be a cost-effective option for less demanding setups, it may not be reliable for more powerful systems.
Pros
Cons
2 4 1 0 |
Not a bad budget PSU for budget builds The power holds. On 12w lines 582w. Price - very good for budget builds, unlike some KSAS :) Cables without braid, although the same KSASA :D has braided cables. SATA cables are quite short.  zennorian: use Xilence XP600R7 few months |
For the money, the power supply is not bad for systems with a peak consumption of 350-400W; if it’s more powerful, it’s better to look at other power supplies. Works in a system unit with e5-2690, 4 RAM dies in overclocking, rx470 4GB flashed in rx570, 1 pc 60GB SSD for the axis and 1 pc 700GB hard drive for file storage, 4 pcs of 120mm turntables for blowing along with the m-t6 snowman tower with its 2 turntables, in the msi power calculator the consumption is right around 350-400 watts. The wires are of sufficient length, suitable for lower location in the system housing. There are 6 pcs sat connectors. The wires do not dangle excessively in their terminals. The product is quite high quality; the BP brand is stamped on the side of the power supply unit. In my case, the cooling fan is quite quiet when the power supply is running under gaming loads. The voltages along lines 3.3 (3.35-3.39V), 5 (4.9-5.1V) and 12V (11.95-12.29V) are the same during idle operation (starting without a PC with a jumper on the green and black wire) and load (games). 6+2pin and 6 pin for video cards and on one harness. There are only two molexes at the ends of two harnesses with sat connectors. In my case, the cable for connecting to the 220V network does not fit tightly in its connector in the power supply (cured by wrapping it with electrical tape). There is no 700w in this power supply, of course, a maximum of 450-500w.  Evgeniy: use Xilence XP700R7 few months |
In principle, it works stably and shows normal voltage. But soon you will have to take the condensers to the workshop to resolder them. All necessary cables are included in the set and are of a normal length Relatively quiet operation compared to the old one Handles my simple system After a couple of months, it started to beep even when the computer was turned off, had to unplug it from the network. The power cable cracked at the plug entry, had to replace it just in case. It might be nitpicking, but the paint job is terrible, the layer is so thin that it immediately scratches, and in some spots, it is even blistered. PahomiyEr: use Xilence XP400R7 few months |
3 out of 7 user review(s) shown
4 more user review(s)
We recommend
550 - 850 W, ATX, 24+8 (4+4) / 24+8+8(4+4) pin, 2 / 4 x 6+2 pin, SATA 3 / 6, Molex (IDE) 3
550 - 1000 W, ATX, modular, 24+8 (4+4) / 24+8+8(4+4) pin, 2 - 6 x 6+2 pin, SATA 6 - 10, Molex (IDE) 3 / 5
750 - 1500 W, ATX, modular, 24+8+8(4+4) pin, 4 x 6+2 pin, 1 / 2 x 16 pin, SATA 9, Molex (IDE) 2
750 - 1200 W, ATX, modular, 24+8+8(4+4) pin, 2 / 3 x 6+2 pin, 1 x 16 pin, SATA 14 / 18, Molex (IDE) 3
850 - 1250 W, ATX, modular, 24+8+8(4+4) pin, 1 / 6 x 6+2 pin, 1 / 2 x 16 pin, SATA 8 / 12, Molex (IDE) 4
650 - 1200 W, ATX, modular, 24+8+8(4+4) pin, 3 x 6+2 pin, 1 x 16 pin, SATA 8, Molex (IDE) 2
750 - 1200 W, ATX, modular, 24+8+8(4+4) pin, 2 / 3 x 6+2 pin, 1 x 16 pin, SATA 14 / 18, Molex (IDE) 3
450 - 850 W, ATX, 24+8 (4+4) / 24+8+4 / 24+8+8(4+4) pin, 2 / 4 x 6+2 pin, SATA 6, Molex (IDE) 1
750 - 1200 W, ATX, modular, 24+8+8(4+4) pin, 3 / 4 x 6+2 pin, 1 / 2 x 16 pin, SATA 5, Molex (IDE) 4
850 / 1000 W, ATX, modular, 24+8+8(4+4) pin, 1 / 3 x 6+2 pin, 1 / 2 x 16 pin, SATA 8, Molex (IDE) 4