Tenko PKE 7.5/220 7.5 kW 230 V
 | Outdated Product Energy source: electricity; Installation: wall; Type: single-circuit (heating only); Heating area (m²): 60; Heat output (kW): 7.5; Coolant min. T (°C): 30; Coolant max. T (°C): 75; Efficiency (%): 99; Combustion chamber: no chamber; Firebox size: Dimensions (mm): 650x260x190; Weight (kg): 18 |
 |
Close
We recommend products in stockBoilers Tenko →
electricity, power 9 kW, area ~ 72 m², wall, single-circuit, heating: up to 72 m², warm floor mode, connection: 220H
Tenko PKE 7.5/220 7.5 kW
230 V
3 kW
230 V
4.5 kW
230 V
4.5 kW
400 H
6 kW
230 V
6 kW
400 H
7.5 kW
230 V
7.5 kW
400 H
9 kW
400 H
10.5 kW
400 H
12 kW
400 H
15 kW
400 H
Energy source:electricity
Mount:wall, single-circuit
Boiler power:7.5 kW, area ~ 60 m²
All specifications
Specifications PKE 7.5/220
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Tenko 2026 - new arrivals, bestsellers, and the most relevant models Tenko.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Tenko 2026 - new arrivals, bestsellers, and the most relevant models Tenko.
AccessoriesAll accessories for Tenko PKE 7.5/220 →
Great boiler, worth the money. Easy to install and operate. After connecting, immediately set the current date and time, otherwise the boiler simply will not turn on the heating. How he defines it, even without a clue. Intuitive and clear control, you can not even read the instructions. The air temperature sensor was included in the kit (very accurate, the change in temperature shows 1/10 of a degree). When the set temperature is reached, the boiler turns off and turns on when the temperature drops by 0.5 degrees. At the same time, it is possible to set the time for pumping the pump both at the moment the heating elements are turned on, and after they turn off. The protection systems worked perfectly (the thread on the battery was poorly packed and when the pressure in the system dropped to 0.9 bar, the boiler automatically turned off the heating, after which it emitted an audible signal and displayed the reason on the display). There are a lot of both settings and information menus with the display of current and set return temperatures, supply, electricity consumption statistics, system pressure. There is a weekly/daily programmer but I have not used it, I maintain the same temperature 24/7. If the boiler will work from a temperature sensor, then in this mode you can turn on the heating modulation mode (he understands that on one heating element he does not draw to the set temperature and connects the second and third as needed). At the same time, the operation of the heaters is scanned, and the boiler turns them on alternately so that the same one does not constantly work. The counter of the spent kW. Hydrogroup of safety of the Italian production. Silent operation. Possibility of remote control and connection of a remote temperature sensor. Three temperature sensors (supply, return, air). Weekly/daily programmer. Automatic diagnostics of heating elements. Temperature sensor short wire  Dmitriy P: use Tenko PKE 4.5/220 few months |
Add Review
Additional features boiler Tenko PKE 7.5/220:
- Ability to connect a Wi-Fi module for remote control