Protherm Medved 50 KLZ 44 kW
 | Outdated Product Floor gas boiler with built-in boiler with a capacity of 110 liters. for hot water preparation. The range of water temperature in the hot water supply system is 37-65°C. The useful power of the device becomes 44 kW and is regulated by a modulating burner in the range of 70% -100%. The model is equipped with a boiler protection system in case of overheating or freezing of water in the heating circuit, lack of draft in the chimney, etc. |
 |
Close
Protherm Medved 50 KLZ 44 kW
Energy source:gas
Mount:floor, dual-circuit
Boiler power:44 kW, area ~ 330 m²
Combustion chamber:open, flue 130 mm
DHW temperature:from 40 °С, up to 70 °С
Floor gas boiler with built-in boiler with a capacity of 110 liters. for hot water preparation. The range of water temperature in the hot water supply system is 37-65°C. The useful power of the device becomes 44 kW and is regulated by a modulating burner in the range of 70% -100%. The model is equipped with a boiler protection system in case of overheating or freezing of water in the heating circuit, lack of draft in the chimney, etc.
All specifications
Specifications Medved 50 KLZ
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2025 - new arrivals, bestsellers, and the most relevant models Protherm.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2025 - new arrivals, bestsellers, and the most relevant models Protherm.
AccessoriesAll accessories for Protherm Medved 50 KLZ →
0 0 1 3 |
the boiler can be adjusted to a lower power setting, making it suitable for smaller areas. When the area increases in the future, it can be readjusted. It has automatic temperature adjustment without any sensors. compact, as for such a model. very efficient. has all the necessary blocks (two circulation pumps, expansion vessels, air vents, valves, recirculation outlet, make-up). to change the parameters manually, you need to scroll through all the data by pressing the MODE button affirmatively.  ALEK: use Protherm Medved 40 KLZ few months |
The boiler is quite compact, if this word is applicable to a floor-standing boiler in principle - all equipment fits in one housing. There is even a built-in boiler with a capacity of 90 liters - convenient, no need to spoil the room by placing an indirect heating boiler. The Bear's heat exchanger is made of cast iron - an excellent material in terms of heat transfer, although not the lightest. I liked the boiler control system - a large bright display, convenient buttons, everything is intuitive. The Bear is quite simple to install; a team of two engineers completed the task in a day, which was a pleasant surprise. Otherwise, everything is fine: there are no problems with heating, there is hot water in the house. thoughtful design and simplicity cost |
Hello. I’ve been using it for four years now. No complaints. The hot water never runs out. In the spring I turn off the heating. Hot water supply all year round. Convenient adjustment. I like all the options. Not detected yet. use Protherm Medved 20 KLZ more than year |
3 out of 4 user review(s) shown
1 more user review(s)
We recommendCompare using chart →
gas, condensing, power 23.5 kW, area ~ 188 m², wall, dual-circuit, open, heating: up to 188 m², warm floor mode
electricity, power 9 kW, area ~ 72 m², wall, single-circuit, heating: up to 72 m², warm floor mode, connection: 220H
gas, condensing, power 20 kW, area ~ 160 m², wall, dual-circuit, closed, heating: up to 160 m², warm floor mode
gas, condensing, power 23.6 kW, area ~ 189 m², wall, dual-circuit, closed, heating: up to 189 m², Wi-Fi, warm floor mode
gas, condensing, power 25.6 kW, area ~ 205 m², wall, dual-circuit, closed, heating: up to 205 m²