Protherm Lynx 11 11 kW (0010016518)
 | Outdated Product Energy source: gas; Installation: wall; Type: dual-circuit (heating and DHW); Heating area (m²): 88; Heat output (kW): 11; Coolant max. T (°C): 85; DHW min. T (°C): 30; DHW max. T (°C): 64; Warm start; Control bus: eBus; Efficiency (%): 88.2; Combustion chamber: closed (turbocharged); Firebox size: Dimensions (mm): 700x410x280 |
 |
Close
Protherm Lynx 11 11 kW
Energy source:gas
Mount:wall, dual-circuit
Boiler power:11 kW, area ~ 88 m²
Combustion chamber:closed, flue 60/100 mm
DHW temperature:from 30 °С, up to 64 °С
All specifications
Specifications Lynx 11
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2025 - new arrivals, bestsellers, and the most relevant models Protherm.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2025 - new arrivals, bestsellers, and the most relevant models Protherm.
AccessoriesAll accessories for Protherm Lynx 11 →
cheap and economical needs to be serviced more often than expensive models use Protherm Lynx 24 more than year |
In general, in terms of price/quality ratio, the boiler is not bad, but there is one problem in operation that you need to be prepared for, namely, due to the disgusting quality of the gas in our systems, soot accumulates on the ionization flame control sensor and the boiler begins to give an error or go out when ignited , this soot needs to be cleaned approximately once a season. There are two ways - the first is a service center and considerable expenses, and the second is to do it yourself, because... There is nothing complicated about this, I want to share with you how easy it is to carry out this procedure yourself: https://youtu. Price sensor clogged use Protherm Lynx 24 month or more i recommend it should buy |
From my own experience, I can say that the best gas boilers currently on sale are condensing boilers. Since 2016, I've been using the condensing "Protherm Lynx". Before that, I used several different types of boilers, including a cast iron floor-standing one and a decent wall-mounted one, but none compare to the Lynx. Each one had its advantages but also significant disadvantages. With this boiler, I don't see any drawbacks. Despite its high efficiency, the boiler is quite economical. The key is to choose the right modification for your area and house construction. There's no need to chase after crazy kilowatts with the principle that the more kilowatts, the warmer it will be. That's not the point at all; you need to choose the optimal equipment. Then it will heat well and be cost-effective. The more the condensing boiler is loaded with power (talking about intense periods when a lot of gas is used), the higher the efficiency and savings. The boiler is modern, convenient and easy to use, safety is at the highest level. But for me the main thing is efficiency. i do not see use Protherm Lynx 24 more than year |
Add Review
We recommend
electricity, power 9 kW, area ~ 72 m², wall, single-circuit, heating: up to 72 m², warm floor mode, connection: 220H
be/a5WcCxiBfPc