Kospel EKCO.L1z 4 4 kW
 | Outdated Product Energy source: electricity; Installation: wall; Type: single-circuit (heating only); Heating area (m²): 30; Remote control unit; Heat output (kW): 4; Rated current (A): 18.3; Coolant min. T (°C): 40; Coolant max. T (°C): 85; Efficiency (%): 99.4; Combustion chamber: no chamber; Firebox size: Dimensions (mm): 660x380x175 |
 |
Close
Kospel EKCO.L1z 4 4 kW
Energy source:electricity
Mount:wall, single-circuit
Boiler power:4 kW, area ~ 30 m²
All specifications
Specifications EKCO.L1z 4
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Kospel 2025 - new arrivals, bestsellers, and the most relevant models Kospel.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Kospel 2025 - new arrivals, bestsellers, and the most relevant models Kospel.
AccessoriesAll accessories for Kospel EKCO.L1z 4 →
2 1 3 1 |
We bought for the duty room, where the security of our enterprise sits - a couple of rooms with a total area of about 35 square meters. meters. It makes no sense to pull gas there, but the electric boiler came in handy. There is a six-speed power adjustment. Full power is often not needed, and operation at lower stages saves energy and prolongs the life of tubular electric heaters. Moreover, the adjustment is quite smooth, without sudden current surges. The boiler starts just as smoothly, full power is gained somewhere in a minute. Works almost silently. The heat exchanger is copper, and copper heating elements are soldered to it. Due to copper-copper soldering, excellent heat transfer is obtained, which improves the operating conditions of the heaters. When the load on the heating elements is turned off, the pump still spins for about a minute and drives the coolant. Thus, the residual heat of the heating elements is taken away by water and does not overheat the heating element itself. The boiler control scheme is simple and understandable. You can set the temperature of the coolant and everything else, including the choice of power, the automation will do itself. Or you can simply adjust the temperature in the room by setting the desired value on the remote thermostat. Affordable price. Considering that the boiler is Polish, i.e. made in the European Union, then the price can and should be rejoiced. Easy installation. The boiler can only be connected to a 380V network. In our case, this was not taken into account and we had to throw a separate cable for the boiler through the air. Not cheap, I must say, pleasure. To protect the automatic control system from power surges, it requires a stabilizer. use Kospel EKCO.L1z 4 month or more |
after 2 months, the robots went out of order on the board 1 semester then covered 5 semesters, 4 working tenes remained. replacement pay costs me about 4 thousand hryvnia. Is it worth getting in touch with such a boiler that from the first day began to draw huge money. no advantages at the service center, unfortunately, the board is not being repaired, I was told only to replace the board use Kospel EKCO.L1z 4 few months |
does not heat the water to the temperature specified in the passport normal design generates a lot of electricity  ybrjkfq: use Kospel EKCO.L1z 12 more than year i recommend it don't buy |
3 out of 7 user review(s) shown
4 more user review(s)
We recommendCompare using chart →
electricity, power 9 kW, area ~ 72 m², wall, single-circuit, heating: up to 72 m², warm floor mode, connection: 220H
gas, condensing, power 80 kW, area ~ 600 m², wall, single-circuit, closed, heating: up to 600 m²