Interskol UShM-115/900 41.1.0.00
 | Outdated Product Type: angle grinder; Power source: mains (230 V); Power consumption (W): 900; Rotation speed (rpm): 11000; Max. disc diameter (mm): 115; Noise level (dB): 103; Weight (kg): 2.2; |
 |
Close
We recommend products in stockGrinders & Polishers Interskol →
angle grinder, 1100 W, saw blade 115 mm, 12000 rpm, kickback protection, additional handle
angle grinder, 900 W, saw blade 125 mm, 3000 – 12000 rpm, speed controller, additional handle
angle grinder, 1100 W, saw blade 125 mm, 12000 rpm, kickback protection, additional handle
Interskol UShM-115/900 41.1.0.00 115 mm 125 mm | ||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Interskol 2025 - new arrivals, bestsellers, and the most relevant models Interskol.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Interskol 2025 - new arrivals, bestsellers, and the most relevant models Interskol.
How to choose an angle grinderBrief instructions for choosing a grinder
How does an expensive grinder differ from a cheap one?Design features and other factors affecting the quality and price of an angle grinder
Model overview based on user reviews
The Interskol UShM-115/900 41.1.0.00 angle grinder is generally appreciated for being comfortable, reliable, and powerful, making it suitable for both home and professional use. Users have reported that it performs well under harsh conditions, such as working with concrete and metal, and has a decent lifespan with proper maintenance. However, it tends to get warm with prolonged use and has a weak contact group on the switch, which may require occasional repairs. Despite these issues, it has been used successfully for various tasks, including car body repairs and tile laying. The product is gradually disappearing from shelves, and users recommend timely maintenance, such as changing bearings and applying insulation protection to the rotor, to extend its life. Overall, it is a good tool with a few drawbacks, but it requires some care to maintain its performance.
Pros
Cons
2 0 2 0 |
Comfortable, reliable, powerful. Gets warm with prolonged use or heavy load, gradually disappearing from the shelves, like all Interskol (Ukr), weak contact group on the switch. use Interskol UShM-115/900 41.1.0.00 month or more |
no The terrible model broke after 3 uses, the service center said it was not covered under warranty. In general, I don’t recommend INTERSKOL to anyone; it’s easier to just throw money out the window. use Interskol UShM-125/900 42.1.0.00 week |
The interskol has slipped. I use grinders often. Every 2-3 years I buy new ones. We have a good load on them, but not on this one. This one was taken to be cleaned up, sharpened, and turned on rarely and not for long. I bought it at the end of January in an offline store and used it for 2 months. With such loads it should have lasted forever. It turned on once a week, while others almost never turn off. And then 2 months passed, the grinder sparked in the brush area and went out. We put it under warranty and the diagnosis was that the brushes were destroyed. After 20 starts, the brushes wore out. Everything else is fine, the case is not under warranty. I wish I could buy a new interskol. Other Bulgarians, by the way, also have interskol. We took it a couple of years ago, apparently the quality was better. Now I don't recommend it at all No The quality has deteriorated use Interskol UShM-125/900 42.1.0.00 few months |
3 out of 4 user review(s) shown
1 more user review(s)
I advise changing the bearings in a timely manner. Another tip is to apply a neat, thin layer of strong varnish to the rotor for insulation protection as soon as you buy it (if you'll be working with concrete, sand, or similar conditions, it definitely won't hurt. Debris knocks off insulation and damages the winding. Subsequently, metal shavings can easily cause a short circuit). This applies not only to this brand and model. This issue is common to almost all angle grinders. That's how mine died too, or rather just the rotor did. But I decided to get a new one, and I'll restore this one as a backup. :)