Electrolux EWH 30 SL
 | Outdated Product Type: storage; Energy source: mains; Tank volume (L): 30; Power source: 230 V; Power consumption (W): 1600; Magnesium anode; Heating elements: 2; dry heater; thermostat; overheat protection; safety valve; Pipe connection: installation dependent; Dimensions (cm): 61.2х38х39.3; |
 |
Close
Electrolux EWH 30 SL | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Electrolux 2025 - new arrivals, bestsellers, and the most relevant models Electrolux.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Electrolux 2025 - new arrivals, bestsellers, and the most relevant models Electrolux.
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
1 1 3 10 |
I used an Electrolux 180-liter water heater for about 10 years. I mainly turned it on during the summer. In winter, I tried to drain the water, but I didn't always do it. I don't remember the model, but the exterior looked like this one. There were no problems, except for some inconvenience during draining. The tank was enameled. When I bought it, I noticed that the warranty was only 1 year. The sellers told me that the anode needed to be replaced often. I never replaced it. Periodically, once every one or two years after draining the water, I would unscrew the nuts, remove the bottom cover, wipe the tank inside as far as I could reach with my hand, and check the condition of the enamel and the anode. There was some rusty substance on the seams. After wiping, I saw a few "spiders" in the seams (using a flashlight). The anode was visibly corroded, but not very deeply. Since there was still a lot of magnesium left in the anode (after 10 years, at least half remained), I concluded that mandatory anode replacement was unnecessary. At least, for our water (St. Petersburg). The heating elements seemed to be covered with glass. Apparently, these are called dry. They still look like new. I would have continued using the device, but after renovations in the bathroom, the water heater no longer fit my space requirements. I gave it to my daughter. Now I'm looking for another one, around 100 liters, which is why I joined this discussion. Apparently, I will get the best one regardless of the price. I don't know how good the modern models are, but that one was definitely good. See comment See comment  Andrey: use Electrolux EWH 100 SL more than year |
be careful with the adapters that come with the kit. They are plastic. One burst during installation. I bought it and installed it, so far so good. Be sure to install an additional drain valve. The valve that comes with the water drain kit is tin. not yet. kto to: use Electrolux EWH 100 SL week |
....... worked for more than 6 years without repair and only recently asked for repair... the tank is good in all respects! not significant... vladimir: just bought Electrolux EWH 100 SL i recommend it should buy |
3 out of 15 user review(s) shown
10 more user review(s)
Additional features water heater Electrolux EWH 30 SL:
- White colour
- Tank material — steel with glass-ceramic coating
- Two modes of heating power, which allows to reduce energy consumption and load on the power grid
- Thermostat on the front panel
- Separate heating elements not in direct contact with water
- The internal capacity of the tank is made of steel (thickness 1.8 mm) and covered with a layer of fine glass enamel
We recommend
tank, 80 / 100 L, wet heater, 3000 W, from overheating, from freezing, 45x78x46 / 45x93x46 cm, horizontal
tankless, heating coil, 24000 / 27000 W, from overheating, Δt ~25°C 12.3 / 13.8 L/min, 48x22.5x10.5 cm, vertical
tank, 10 L, wet heater, 2500 W, from overheating, from freezing, dry heating protection, 36x36x29.8 cm, vertical
tankless, wet heater, 13200 W, from overheating, Δt ~25°C 6.7 L/min, 37x22x13 cm, vertical
tankless, heating coil, 3500 W, from overheating, Δt ~25°C 2 L/min, 14x19x8 cm, vertical
tankless, heating coil, 13500 W, from overheating, dry heating protection, 29.4x18x11 cm, vertical
tank, 10 / 15 L, wet heater, 1500 / 2000 W, from overheating, 40x38x30 / 41x37x25 cm, vertical
tank, 30 / 80 L, wet heater, 2, 2000 W, from overheating, from freezing, RCD, 102x51x29.3 / 58.7x45.2x26.3 cm, universal (wall)
