Catalog   /   Home & Renovation   /   Autonomous Power Supply   /   UPS   /   Eaton

Eaton 5P 1550I 1550 VA

Photos - UPS Eaton 5P 1550I 1550 VA
Photos 5
Outdated Product
Type: smart; Form factor: standard (Tower); Full load operating time (min): 4; Half load operating time (min): 13; Input voltage: 1 phase (230V); Input voltage range (V): 160-294; Peak output power (VA): 1550; Rated output power (W): 1100; Output waveform: pure sine wave (PSW); Dimensions (mm): 230x150x445
add to listmy lists
Eaton 5P 1550I 1550 VA
Main
Typesmart
Form factorstandard (Tower)
Full load operating time4 min
Half load operating time13 min
Input
Input voltage1 phase (230V)
Input voltage range160-294 В
Bypass (direct connection)manual
Output
Output voltage1 phase (230V)
Peak output power1550 VA
Rated output power1100 W
Output voltage accuracy10 %
Output waveformpure sine wave (PSW)
Output frequency50-60 Hz
Reserved C13/C14 connectors8
Battery
Total battery capacity9 Ah
Number of batteries3
Cold start
Battery hot swap
Protection
Protectionoverload protection
emergency cut-off socket
Fuseauto
Control interfacesRS-232
USB
SmartSlot / Network-MS, ModBus-MS, Relay-MS /
General
Screen
Operating temperature0 – 40 °C
Noise level40 dB
Dimensions (HxWxD)230x150x445 mm
Weight15.6 kg
Added to E-CatalogFebruary 2014
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Eaton 2025 - new arrivals, bestsellers, and the most relevant models Eaton.
good model, I liked it.
28 March 2016 
The device is intended primarily for office use. The UPS is able to work around the clock, supporting the functioning of server and other IT equipment. The device protects expensive equipment from power surges. The device is quite heavy, so it is best to put it on the floor.
I paid attention to this model because of the wide input voltage range. The device digests well from 160 to 290 V, without switching to battery operation. Batteries are only used during a power outage. A couple of times the light went out for an hour, but the supply was enough for the server to continue to function. The consumption optimization system is interestingly implemented. When there is no light, you can turn off some non-critical equipment to keep the server running as long as possible. The remaining energy can be monitored using the display or using special software. The system accurately estimates the amount of charge in the batteries. It's nice that the device has developed communication capabilities. There is a USB port and RS232. There is also a small terminal block for emergency power off.
For three months of work in a constant mode, no critical problems were identified. The only thing is that the USB port and RS232 do not work at the same time, only in series. Such is the feature of this model.
use Eaton 5P 1150I month or more
Add Review