DeWALT D25134K
 |
 |
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog DeWALT 2026 - new arrivals, bestsellers, and the most relevant models DeWALT.
0 0 2 2 |
DeWALT D25134K 04BBE Great rotary hammer, it gets the job done quickly and efficiently. The removable chuck is very convenient, you essentially get two tools in one. I'm satisfied with the purchase, it's not my first tool from the DeWalt brand, and I have never been disappointed. Removable drill chuck No  Kirill Belov: use DeWALT D25134K few months |
I’ve been using a hammer drill since the beginning of November 2017, I’ve used it many times and for different purposes (drilling wood and concrete, drilling with chiselling concrete, drilling tiles, beating mortar with a chisel, sanding) and I’m happy with everything, especially the presence of a high-quality quick-release chuck, but there are a couple shortcomings. Price, assembly, weight, very convenient case, minimal vibration, quick-release chuck. When I beat off the tiles, a little grease came out of the sds cartridge. The cord is not too long, but tolerable. A little noisy, but again tolerable.  Ilya: use DeWALT D25134K few months |
A good hammer drill, I bought it a little over a month ago, it costs about 12,000, it worked in all modes, everything was fine, good impact force, fits comfortably in the hand Of the minuses, the cord is short, the crushing mode is difficult to turn on, you have to turn the cartridge until it clicks, and as they wrote in the previous comment, it takes time to warm up, overall I’m happy use DeWALT D25134K month or more i recommend it should buy |
Exactly what is needed
The DeWALT brand needs no introduction: everyone who has or has dealt with it has long known that its technique is flawless in operation.
Rotary hammer model D25134K has three modes: drilling with impact, without impact and slotting. The power consumption of 800 W and the impact force of 2.8 J allow you to make holes in hard materials, loosen and remove plaster, asphalt, remove layers of concrete, brick. The rotary hammer is also suitable for installing anchors, installing electrical networks, communications, fastening household appliances, and performing finishing work. In addition to the SDS+ chuck, the kit also comes with a keyless chuck with a standard shank, which allows you to use the model as a drill/driver.
Functional and comfortable
The D25134K is ergonomically designed, although not the lightest at 3kg. But thanks to the additional handle, which contributes to an even distribution of the load on the hands, long-term work with the tool does not tyre. Rubber seals on the body and handle prevent hands from slipping, partially dampen vibration and protect against dust and dirt getting inside the tool.
The high frequency of impacts (5540 beats / min) makes it possible to quickly drill numerous holes, and the depth gauge eliminates the need for constant measurements, however, it is made of plastic and risks not living for a long time.
Necessary additions
The safety clutch will protect the master from injury, and the device from breakage if the load on the engine is exceeded and the tool jams in the material. With a brush reverser it is easy to remove the drill from the working environment of any density. D25134K has a strong, but, unfortunately, not long enough (up to 3 m) cord without a hinge, and a plastic case can accommodate very few additional accessories, so not everyone will find it convenient.
- Model D25134K - without dust box
- Model D25135K - with dust collector
