Headphone Amplifiers S.M.S.L

【Fully Balanced Design】: SMSL VMV P2 headphone amp is equipped with 4 channel ultra-low distortion precision linear feedback circuit (PLFC). It has a frequency response of 20Hz to 100KHz (-0.5dB), distortion as low as 0.00006%, and SNR (signal-to-noise ratio) as low as jaw-dropping At 133dB, It can restore the most authentic sound of the recording studio, allowing you to enjoy music. 【3 Levels Of Gain Control】: audio amplifier switchable high, mid, and low gain controls give you Adjustment space.3 levels of gain can meet the needs of different headphones. The low gain setting is optimized for IEMs (in-ear monitors). Whether it is low-impedance headphones or high-sensitivity IEM. It will cus…

【Fully Balanced Design】: SMSL VMV P2 headphone amp is equipped with 4 channel ultra-low distortion precision linear feedback circuit (PLFC). It has a frequency response of 20Hz to 100KHz (-0.5dB), distortion as low as 0.00006%, and SNR (signal-to-noise ratio) as low as jaw-dropping At 133dB, It can restore the most authentic sound of the recording studio, allowing you to enjoy music. 【3 Levels Of Gain Control】: audio amplifier switchable high, mid, and low gain controls give you Adjustment space.3 levels of gain can meet the needs of different headphones. The low gain setting is optimized for IEMs (in-ear monitors). Whether it is low-impedance headphones or high-sensitivity IEM. It will cus…

【Flagship Four-Core Audio Architecture】 SMSL LIN.LIN.LIN is equipped with 4 CS43131 flagship decoding chips. It presents 119dB dynamic range and -115dB ultra-low distortion, making the sound as pure as the original sound reproduction, and every note is accurate and fresh 【E-Sports Lossless Transmission Solution】 Gaming DAC M20 adopts dual-mode USB interface design (USB2.0/1.1), USB1.1 is specially optimized for compatibility with game devices such as Switch/PS5, and the third-generation USB chip XMOS XU-316 core supports 32bit/768kHz PCM decoding and DSD256 hard decoding, which can accurately locate the enemy's footsteps and ensure the synchronization of game sound and picture.

The DL400 features 4 ultra-low-distortion Precision Linear Feedback Circuit (PLFC) headphone amplifier circuits in fully balanced design with an output power of up to 6W x 2an 16 Ohm and up to 3W x 2 at 32Ohm. With two headphone jacks, a 6.35 mm headphone jack and a balanced 4.4 mm headphone jack on the front, as well as an I²S input and an XLR output. New third generation XMOSXU-316, PCM playback support up to 32bit/768kHz, DSD support up to DSD512, USB, optical, coaxial and 2S support DSD transmission. Coaxial and optical supports DOP64. Adopted DAC chip ES9039MSPRO, supports MQA decoding, supports MQA-CD. integrated low-noise power processing, while improving energy efficiency, low power c…

The design uses the latest high quality sound technology and a fully separated digital/analog solution to achieve a sound experience as if you were on site. In conjunction with the AK4191EQ, the AK4499EXEQ is the ideal analog conversion solution for reproducing high-resolution sound sources. The new third generation XMOS XU-316 supports PCM up to 32bit/768kHz. DSD supports DSD512, USB, optical, coaxial and I2S support DSD transmission. Coaxial and optical DOP64 is supported. Filtering is a step that converts PCM digital audio into an analog signal. It mainly affects high-frequency signals after about 20 kHz. The 6 modes of the DL300 are shown in the picture below. On the front there is a …

AK4499EX + AK4191 chip: It has excellent noise and THD properties and is a new stereo chip specially developed by AKM. Synchronous start of the AK4191 and AK4499EX with the use of the analog signal can be easily achieved and analog signals are completely separated from a variety of tiny sound details online. Headphones two gain adjustable high performance: in the front class, 6.35 mm headphone jack and 4.4 mm headphone jack, internal use of PLFC headphone amplifier circuit, provide excellent performance. 6 types of PCM filters, 4 types of tones available: filter is a step to convert PCM digital audio into analogue signal. It mainly works on high frequency signals after about 20 kHz. PCM playback …

【Equipped with 4 CS43131DAC Chips】The SMSL DS20 has 4 Cirrus Logic flagship CS43131 audio decoding chips built in, and the architecture builds an ultra-luxury audio decoding system. Combined with the new third-generation XMOS XU-316, PCM supports up to 32bit/768kHz and DSD supports up to DSD256. 【USB Dual Mode】The USB DAC decoder is equipped with a dual-mode USB interface, which cleverly integrates USB1.1 and USB2.0 dual transmission protocols. USB1.1 makes it convenient for users to connect to game consoles such as PS5. USB2.0 mode focuses on high-resolution audio transmission, and easily handles all kinds of lossless music file 【MQA-CD MQA 8x Expansion】S.M.S.L DS20 MQA is equipped with cutting…

Professional audio decoding: 4x CS43131 chips and PLFC balanced circuit with MQA decoder, 126dB dynamic range for hi-fi sound details. Compatibility with devices: USB 1.1/2.0 for PC, PS5, Switch, ideal for gaming and entertainment. High-end components: XMOS XU-316 supports 32bit/768kHz & DSD256, low-noise power supply and special clock circuit. Portable magnet design: compact case with magnetic decoder, stable and mobile for hi-fi on the go. Wide frequency range: 126dB SNR and ultra-wide frequency coverage for music, movies and games.

【ESS High-end Decoder Chip】 DL200 adopts chip ES9039Q2M, which is a high-performance, 2-channel decoder chip. Utilizes the latest technology and advanced architecture. Provides a level of performance that meets the needs of demanding audiophiles and professional audio enthusiasts. 【Dual Mode USB2.0/1.1】 2 different USB modes can be switched within the menu. Using USB2.0, driver installation is required to support 768kHz/32bit high bit rate audio files. Using USB1.1 mode can support 96kHz/24bit bit rate audio files without driver, and directly connect to many devices to output audio. It can be connected to game consoles, TVs, etc. 【High Power Output Multi-Output Interface】 Provides 6.35mm singl…

【46dB Golden Gain·Super Energy】The SMSL PH-1 MM phono amplifier is designed with 46dB professional-grade gain to amplify the weak vinyl needle signal (usually 5-8mV) to 1000mV standard signal output, which not only avoids the thin sound and dynamic compression caused by insufficient gain, but also prevents overload distortion through the intelligent limiting circuit, achieving the golden listening experience of "full energy without distortion". 【Focus on MM·Ultra-low distortion】S.M.S.L PH-1 is committed to being the best MM, becoming a rare pure MM architecture phono amplifier on the market. Abandoning the MM/MC switching function, all R&D efforts are put into the exclusive optimization of MM cart…

High Performance MQA DAC Amplifier: Harnessing the audio decoding chipset, the CS43131 from Cirrus Logic, SMSL DS100 boasts meticulously designed circuitry that elevates its performance to an astonishing distortion level of 0.00017% (-115dB)! It provides an unparalleled music experience and brings you into a new realm of music enjoyment. Supports MQA/MAQ-CD Decoding. Restore the most authentic sound in the recording studio. USB DAC XMOS XU-316 PCM support 32bit/768kHz & DSD512:Powering USB decoder is the brand-new third-generation XMOS XU-316, which boasts PCM support up to 32bit/768kHz and DSD support reaching DSD512. This ensures that your audio experience is as pristine and lossless as

【Four core decoding with excellent sound effects】The SMSL DL100 uses four CS43131 chips. Can sample PCM digital audio directly at 32bit/768kHz without the need to lower the sampling rate downwards. It also supports native DSD playback of DSD256 without the need for conversion. Fiber optic and coaxial inputs support DOP64. 【Ear amplifier circuit newly upgraded】The 6.35mm headphone jack and 4.4mm headphone jack are provided on the front panel using self-developed independent amplification circuits, with excellent performance. Compared to the previous generation CS43131 product, the output power has increased by about 16 times at 3002. 【Dual mode USB 2.0/1.1】Connecting game consoles is more conv…

【Small size and high performance】The SMSL is a versatile decoder with great versatility and high-quality sound reproduction. It is compatible with DAC and headphone amplifier. It uses 2 Cirrus Logic audio decoding chips with a distortion as low as 0.00015% (116dB). With its carefully designed structure, your music can be clearly conveyed to you. Less distortion, more enjoyment. 【Powerful headphone amplifier】This mini headphone amplifier has a 3.5mm headphone jack and a 4.4 balanced headphone jack. The headphone amplifier output power is up to 500mW@16Ω, which can easily handle most headphones on the market. 【Support USB: Wide Range of Scenarios】When this USB DAC plays music,

Support DSD256 hard decoding and PCM 32bit/384kHz: The data status indicator lights up when playing music. The D10 supports DSD256 hard decoding and PCM 32bit/384kHz hi-res specifications to achieve highly reproduce sound! 3.5+4.4 Balanced Dual Jack: The output power of headphone amplifier is up to 500mW@160, suitable for most headphones! Cirrus Logic DAC Chip 2xCS43131: Using 2 pieces of audio DAC chip CS43131 of Cirrus Logic with well-designed circuit,excellent performance,sounds more pure! Minimalistic Design Clear at A Glance: Transparent window and textured aluminum housing matched, the internal chip is visible! Side volume button is convenient to operate and control. 12-month warranty,…

S.M.S.L D10 is a mini audio decoder ear amplifier that uses 2 Cirrus Logic audio decoding chips, combined with carefully designed circuits, with excellent performance indicators and purer sound! D10 supports DSD256 hardware decoding and PCM 32bit/384kHz high-resolution specifications. When playing music, the data status indicator light will light up, achieving a high degree of sound restoration! 3.5mm headphone jack and 4.4mm balanced jack, dual port dual convenience, ear amplifier output power up to 500mW@16 Ω, can easily handle most headphones on the market. Multiple usage scenarios allow for easy connection between computers and mobile phones. It is compatible with Windows 7/8/81/10/11 (…

【 High Power Output Function 】️ Headphone Amplifiers unleashes ultra-high power output. With 16 ohms, it delivers up to 15W, and at 32 ohms, it reaches 7.5W.Its distortion rate is staggeringly low at 0.00006%, while the SNR stands at an impressive 133dB. Ensuring an immersive listening experience. 【 High & Medium & Low 3 Gears Gain Switchable Gain Control]️H400 provides 3 Gears Gain switchable gain control function to meet the personalized needs of different users. The low gain setting is specially optimized for IEM (in-ear monitor headphones).High-sensitivity in-ear headphones, high-gain drive full-size over-ear headphones. It is suitable for both professional musicians and

Fully balanced discrete component design, with ultra high power output. The distortion is as low as (THD+N) 0.00006%, and the signal-to-noise ratio is as high as 133dB! High output power, with an output power of 15W at 16 ohms and 7.5W at 32 ohms. Use electronic relays to control volume and eliminate channel deviation! High, medium, and low levels can switch gain control, and low gain is specifically optimized for IEM. The front-end output function can be used as a Hi End front-end. Ultra compact design, perfect for desktop headphone systems. High precision low-temperature drift resistance, performance not affected by temperature. High quality relays and no impact sound design. Frequency response …

Enhanced Sound Clarity : Equipped with an ES9038Q2M DAC chip and 4*OPA1612 opamps, the C200 delivers warm and smooth sound while retaining intricate details, allowing you to hear micro details and subtle nuances in your favourite music files Versatile Connectivity : The C200 offers multiple input options, including USB, Optical Toslink, Coaxial SPDIF, and Bluetooth 5.1 with LDAC support. This enables seamless compatibility with various music sources, from phones and tablets to game consoles like PS4, and PS5 Headphone Output Options : With both 4.4mm balanced and 6.35mm single-ended headphone outputs, the C200 caters to audiophiles using different headphones and in-ear monitors. Its