Vihr FM-1300 (72/13/1)
Diamond Core Bits & Milling Cutters3062
 |
Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 45 • Overall Length Metric: 96 • Bearing Dia Metric: 25.4 • Bearing Dia Imperial: 1
 |
Four piece cutter pack aimed at kitchen fitters. Pack includes two 1/2 inch x 50mm cut length worktop cutters, one laminate trimmer and a biscuit jointing cutter. Gives a clean finish to abrasive ma more→terials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Type …
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 23 • Dia Imperial: 29/32 • Cut Length Metric: 19 • Overall Length Metric: 57
 |
399.99Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
 |
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 67 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2
 |
1,039.99Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
 |
Ideal for fast chamfering to remove edge on timber or create a decorative edge. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric more→: 53 • Angle: 45
 |
Solid carbide bearing guided router cutters for trimming aluminium sheet to a template. Specially designed carbide with two flutes for clean finish. Maximum trim of 3mm thick aluminium. Double bear more→ing guide on nose. Recommended that a lubricant is used to reduce tool breakage. Downcut for better clamping when machining small workpieces and improved finish on the tops of the board. Eject chips up or down depending on tool used. Material must be securely clamped. Specifications • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 72 • Type or Grade: Down-cut
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.