Milwaukee M18 FSAGF125XPDB-0X (4933478439)
Cutting Discs214
 |
Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation. Lasts many times longer than normal sanding discs. Abrasive flaps are attached to rigid d more→isc with epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools.
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood metal plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA80 125mm. 80 grit is suitable for final grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12 200 RPM.PTDFAIFD125
 |
Reliable Cuts in Tiles - The Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles. Its continuous cutting rim achieves accurate results in all sorts of tiles. Additionally, the di more→sc's high-quality standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting ceramics, porcelain and fine stoneware. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Tiles • Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles • Continuous cutting rim achieves accurate results in all types of tiles Specifications Diameter: 125mm Bore diameter: 22.23mm Bore size: 22.…
 |
Rough Grit Sanding (P50 and Rougher) - The X-LOCK Backing Pad Hard is ideal for rough grit sanding (P50 and rougher). It features an extra-rigid multi-groove construction that maximises contact pressu more→re between disc and workpiece, enabling heavy-duty, highly aggressive sanding applications. For convenient work, the pad´s angled surface provides an ergonomic grinding position. Manufactured from fibreglass reinforced thermostable plastic, it resists even highest temperatures and breakage. It is suitable for use with X-LOCK angle grinders. X-Lock clip is included. Changing backing pads is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Makita Comet Diamond Cutting Blade Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting. Symmetrical head-geometry with centring-tip for optimised results in t more→he event of reinforcement. Ideal for use on porcelain and ceramic tiles. Features & Benefits • Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting • Smooth cut • Suitable for porcelain and ceramic tile • Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement Specifications • Diameter: 125mm • Segment Height: 5mm • Bore: 22.23mm • Pack Quantity: 1
 |
Extra-Clean Cuts in Porcelain - The Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain. Its turbo rim is designed to achieve neat results in all kinds of ha more→rd ceramics, while the optimised diamond matrix delivers chip-free cuts. Use this disc for cutting ceramic, porcelain and fine stoneware. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Clean Cuts in Porcelain • Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain • Turbo rim for neat results in all kinds of hard ceramics Specifications Diameter: 125mm Bore diameter: …
 |
A27 series Pro Metal grinding discs for angle grinders. Specifications • Diameter: 125mm • Quantity: 1
Wire & Cup Brushes308
 |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 100mm 6mm Shank 1609200273
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
 |
Price from £15.95
Compare prices5→Compare prices and buy Bosch X Lock Crimped Steel Wire Cup Brush 75mm X-Lock 2608620725
Extra-Fine Surface Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire provides an extra-fine surface finish. Fitted with crimped wire for light-to-medium
 |
Price from £21.53 up to £24.95
Compare prices5→Compare prices and buy Lessmann 423.16X X-Lock Crimped Cup Steel Brush 85Mm Non Spark LES42316X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting they can be used for polishing light deburring work and removing rust paint dir more→t and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses car workshops and by staircase railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Crimped Cup Steel Brush 85mm Non SparkPTDLES4231
 |
Price from £39.88 up to £44.95
Compare prices6→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 150mm M14 x 2.0 Thread LES429177
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £1.86 up to £2.95
Compare prices6→Compare prices and buy Draper 41437 Brassed Steel Crimped Decarb Brush 13Mm each 1
This wire end brush is designed for decarbonising cylinder head ports and engine components. The bristles are made from hardened dipped brassed steel wire which gives a high level of durability and r more→esistance to oxidation. The brush is strong enough to provide reliable performance and the crimping is flexible to tackle recessed areas and irregular surfaces. Its size and shape makes it ideal for hard-to-reach areas such as drill holes recesses and corners. Fitted with a 6mm round shank. Compatible with most drill drivers and drills with a 13mm chuck.PTDDRPDIR
 |
Price from £4.56 up to £5.49
Compare prices5→Compare prices and buy BlueSpot Tools 19218 Steel Wire Cup Brush 100Mm M14 X 2 B/S19218
The BlueSpot Tools Steel Wire Cup Brush is manufactured from hardened steel wire for increased durability. Ideal for preparing metal surfaces for welding and painting.This BlueSpot Tools Steel Wire Cu more→p Brush has the following specifications: Wire: 0.3mm.Diameter: 100mm (4in) / M14 x 2 Fitting.Max. Safe Speed: 8500 RPM.PTDB/S19218
 |
Price from £7.02 up to £8.95
Compare prices5→Compare prices and buy Lessmann 451.162 Pointed End Brush With Shank 12/60 X 20Mm 0.30 Steel Wire LES451162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mm.Wire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20 000/rpm.PTDLES4
 |
Price from £29.95
Compare prices5→Compare prices and buy Bosch 0.5mm Knotted Steel Wire Cup Brush 90mm M14 Thread 1608614001
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.