Metabo W 850-125 601233010
Cutting Discs159
 |
Lasts up to 100x longer than Bosch 2608619767 Cutting Disc Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemi more→cal smell of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, pro…
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Reliable Cuts - The Standard for Abrasive Diamond Cutting Disc provides reliable cuts in all sorts of abrasive materials. Its optimised diamond matrix delivers solid results thanks to the disc's high- more→quality standards, which are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of abrasive materials. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits: • For All Types of Abrasive Materials • Optimised diamond matrix delivers solid results Specifications: Diameter: 125mm Bore diameter: 22.23mm Bore size: 22.23mm Cutting width: 1,6mm Segment height: 10mm
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Designed for cutting metal Need a long-lasting cutting disc to make fast cuts in metal? Try the PRO Metal. We made it using high-quality abrasive grains for strength and durability. We made the dura more→ble PRO Metal Bonded Cutting Disc with premium aluminium oxide grains to make sure it cuts effectively. And combined the grains with functional fillers and embedded them in a phenol resin matrix for strength and resistance to heat. We reinforced the disc with a high-quality fibreglass net for safer and more stable performance. With 22.23 mm bore for standard locking nut angle grinders Features and Benefits: • Designed for cutting metal • With 22.23 mm bore for standard locking nut angle …
 |
Aluminium oxide, depressed centre disc for electric and air tools. Suitable for metal grinding applications.
 |
Up to 1.5x faster than a Bosch X431 Flap Disc Flap discs offer a great combination of durability and fast stock removal, and this PRO X571 is even faster than most. The PRO X571 Flap Disc has an X-c more→loth backing for stable grinding. The advanced grain fusion of aluminium oxide and zirconia offers fast stock removal even in hardened steel. Click it on with X-LOCK or use it with nut and thread angle grinders Tested in Bosch labs according to Bosch standard procedures. Features and Benefits: • Up to 1.5x faster than a Bosch X431 Flap Disc • Click it on with X-LOCK or use it with nut and thread angle grinders • For grinding metal, eg when removing welds and stock on mild steel …
 |
Designed for cutting construction materials Working on a construction site often means you need to cut various building materials. A versatile cutting disc helps you save time and effort. That’s why more→we created the PRO Multi Construction. We used a special mix of abrasives to ensure it will cut different materials effectively. The PRO Multi Construction Bonded Cutting Disc is made for construction workers who need to cut different materials. The disc is made with a mix of silicon carbide and aluminium oxide grains for the strength you need to tackle steel, metal, stone, brick, and plastic. Thanks to its thin kerf you work with less noise and get clean, accurate cuts – with only little pressure. Cl…
Wire & Cup Brushes210
 |
Price from £14.04 up to £21.99
Compare prices6→Compare prices and buy Faithfull Wire Cup Brush 150 X M14 X2 0,30Mm, Red FAIWBC150
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For cleaning metal surfaces prior to painting M14 thread mount M14 thread mount Specifications: Dimensions: H:18.0 x W:10.5 x D:16.0 cm Colour: Red Guarantee:5 years Material: Metal Model Number: FAIWBC150
 |
15.26Buy!
£
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting and the removal of slag rust scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.This Lessmann Knot Cup Brush has the following specification: Diameter: 65mmThread: M10 x 1.25Wire Gauge. 0.50Wire Type. SteelMax. R.P.M. 12 500PTDLES482213
 |
Price from £16.95
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Cup Brush 75mm M14 Thread 2608622099
Designed for cleaning steel Are you a metalworker who needs to clean steel efficiently? The PRO Metal heavy Cup Brush is a heavy-duty accessory fit for the job. It works fast and leaves clean, rough more→surfaces – time and again. The PRO Metal heavy Cup Brush will be a durable addition to any metal shop where you need to clean welded seams, heavy rust, old paint, varnish, and underseal from steel surfaces. The wire cup brush is made with premium knotted wire to make sure you can use it for heavy-duty jobs. The cup brushes come with wire of different thickness. Use cup brushes with thicker wire for fast, coarse finish, and the ones with thinner wire to get a smoother surface. Fits all M14 angle gr…
 |
Price from £13.49 up to £17.95
Compare prices6→Compare prices and buy Draper Expert Brassed Steel Wire Cup Brush 60mm M14 Thread
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Features and Benefits • Expert Quality • For angle grinders &bu more→ll; 0.3mm hardened brassed steel wire Contents 1 x Draper Expert Crimped Wire Cup Brush, 60mm, M14
 |
Price from £3.00 up to £3.49
Compare prices5→Compare prices and buy BlueSpot Twist Knot Flat Wire Wheel 75mm 6mm Shank 19223
The BlueSpot Tools Flat Twist Knot Wire Wheel Brush is manufactured from hardened steel wire for increased durability. Twisted steel filaments provide quick and efficient cleaning action. Ideal for re more→moval of dirt, paint, rust, scale and more.Thi BlueSpot Tools Flat Twist Knot Wire Wheel Brush has the following specifications: Diameter: Diameter: 75mm (3in).Arbor: 6mm (1/4in).Max. Safe Speed: 12,500 RPM.Additional Information:&bu
 |
Price from £11.52 up to £18.99
Compare prices7→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock, Multi FAIWBT75XL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish from steel surfaces. The X-LOCK quick change system ensures a fast, reliable and effective one clic more→k change between tools when used with a compatible angle grinder. Features: Use on steel X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools 0.5mm twist knot steel wire Specifications: Dimensions: H:11.5 x W:6.0 x D:9.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT75XL
 |
Price from £1.86 up to £2.49
Compare prices5→Compare prices and buy Faithfull Crimped Wire Wheel Brush 50mm 6mm Shank WBS50C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £9.28 up to £12.95
Compare prices6→Compare prices and buy Draper Brassed Steel Wire Cup Brush 100mm M14 Thread
This wire cup brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Compatible with most angle grinders with an M14x2 connection. Conforms to EN1083-1 and EN1083-2 Features and Benefits • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces …
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
