Metabo BS 18 LTX Quick 602193500

Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents more→wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank is smaller than drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits …

SGL Drills Stainless Steel Through CoolantHigh-Performance Solid Carbide Drills

Drilling Through Reinforced Concrete Is A Difficult Task That Demands A Lot From The Drills. Normal Drills With Two Cutting Edges Get Stuck In The Reinforcement And Break Off. The Solid Carbide Head O more→n The Expert Sds Plus-7x Is An Advanced 4-Cutter Made From A Single Piece Of The Hardest Metal: It Does Not Jam And Shows No Weakness When Hammer Drilling.Features:- For Hammer Drills- Lasts Up To 3 Times Longer Than Standard Drills- Outstanding Durability In Reinforced Concrete- Extremely Durable Drill Tip With Bosch Carbide Technology- Penetrates Reinforced Concrete By Means Of 4 Cutting Edges Solid Carbide Head- Suitable For All Sds Plus Hammer DrillsIdeal For Drilling Holes In:- Cured Concrete- …

The Metabo ASC 55 Air Cooled Slide Charger charges all Li-Power Compact Li-Power Plus Li-Power Extreme and LiHD slide-on battery packs (12-36V). Monitors charging via a microcontroller and delivers more→acurate battery diagnosis. The charger switches to compensation charge: to conserve the capacity the battery pack is charged for 1 second every 45 seconds with 2.5 ampere. With a 'AIR COOLED' function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature and then during the charging process are constantly maintained at optimum temperature. With this principle a higher tool life …

Features:Single cell monitoring.Minimum temperature development.Processor-controlled charge and discharge management.No memory effect.´´AIR COOLED´´ charging technology.Almost no self-discharge.Capaci more→ty indicator for permanent control of the filling status.Suitable for:Metabo.BS 18 L, BS 18 L BL Q, BS 18 Li, BS 18 LT, BS 18 LT BL, BS 18 LTX, HO 18 LTX 20-82, KHA 18 LTX, MT 18 LTX, RW 18 LTX 120, R12-18, SB 18 LT, SSD 18 LTX 200 BL, SSE 18 LTX, SSW 18 LTX 300, SSW 18 LTX 400, SSW 18 LTX 600, STA 18 LTX 100, STA 18 LTX 140, STAB 18 LTX 100, W 18 LTX 125.