Makita RP0900
Diamond Core Bits & Milling Cutters113
 |
1/4" Straight 9.5 x 25mm TCT Router Bit Contents 1 x TCT Router Bit, 1/4" Straight, 9.5 x 25mm
 |
This Tungsten Carbide tipped cutter is similar to an ovolo cutter and provides a rounded profile along the edge of the material.It differs from ovolo cutters by producing a single step only. Shank: 1/ more→4in. Features: Produces a stepped rounded profile along the edge of the material TCT cutting edges TCT cutting edges Guide pin enables the cutter to follow intricate shapes Differs to Ovolo cutter by producing a single step only Specifications: Dimensions: H:12.0 x W:3.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB41
 |
The Dormer G136 HSS 90° Countersink is designed to provide precise and efficient cutting for countersunk-hea
 |
1/4" Groove 12.7mm x 90° TCT Router Bit Contents 1 x TCT Router Bit, 1/4" Groove, 12.7mm x 90°
 |
Trend Snappy 9.5mm diameter countersink - with adjustable pilot drill 9.5mm diameter countersink with pilot drill designed for Imperial No6 gauge screws in softwood. The perfect, fast swap accessor more→y for clean, consistent finishes." Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike." Fitted with high quality 2.5mm diameter replaceable HSS (High Speed Steel) drill Ideal for metric screws up to 5mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications …
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 3.2 • Cut Length Imperial: 1/8 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Sawbore: 6.35 • Sawbore Imperial: 1/4
 |
A bearing guided, tungsten carbide tipped cutter producing a 45° chamfer to a maximum depth of 10mm. Suitable for use on softwood, hardwood and all man-made boards.Shank: 1/4in. Features: Produces more→a 45° chamfer to a maximum depth of 10mm TCT cutting edges TCT cutting edges Bearing guided Specifications: Dimensions: H:12.0 x W:3.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB81
|
The Dormer G136 HSS 90° Countersink is designed to provide precise and efficient cutting for countersunk-hea
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
