Makita HR2630 110V

HSS roll forged blacksmiths drill bit with a reduced shank to enable use with a standard chuck. Drill has a black oxide finish and 95mm working length. Supplied in a plastic wallet.

The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit useful for reaching awkward spots or for drilling accurate deep holes into wood. It has a positive cutting angle which drills h more→oles twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-30-400 Long Flat Bit 30mmPTDBAH963130

Hexagon shank Selfcut flat drill bit for wood. Specifications Width: 32mm

Expert Quality, revolutionary auger bits, manufactured with four razor sharp carbon steel cutting edges. Their unique design helps the bits pull themselves through the material when drilling, making t more→asks effortless whilst delivering perfect holes every time. All sizes have a strong 6.35mm hex shank. Features and Benefits • Expert Quality • Manufactured with four razor sharp carbon steel cutting edges • Their unique design helps the bits pull themselves through the material when drilling • Makes tasks effortless whilst delivering perfect holes every time • All sizes have a strong 6.35mm hex shank Contents 1 x 4 Fluted Auger Bit, 12 x 165mm

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes more→in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 5.5mm • Length: 210mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability …

Rotabroach TCT Holecutters for use with Pistol Drills & Pillar Drills in steel up to 25mm thick. Note: It is advisable to pre drill 6mm hole to avoid damage to cutter when breaking through with pilot more→drill supplied. Features & Benefits • Manufactured with high quality solid carbide tips for maximum performance and reliability • High quality centre drill spring loaded for fast waste material ejection • Fast cutting time compared to standard twist drills • Used in conjunction with drill chuck • Ideal for Structural Steel, Stainless Steel & Pipework Specifications • Diameter: 31mm • Length: 25mm • Cutting Depths: 15mm in Pistol Drill / 25mm in Magnetic Drill …

Acc. to DIN 6450 GEDORE vanadium steel Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished Special sizes available more→on request

The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control f more→eels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger …

The Sds Max Flat Chisel Provides Standard Chiselling For Various Demolition Applications In Concrete And Brick. Good Material Removal On Light Applications Is Made Possible By The Flat Cutting Edge. T more→he Chisel Is Intended For Use In Applications Such As Mortising, Demolition And Adjustment Work, As Well As For Restoring Joints And Clearing Reinforcements. It Is Compatible With Sds Max Shank Systems.Specifications: - Length: 400 Mm- Product Type: Rotary Hammer Chisel Attachment- Chisel(S) Cutting Edge: 25 Mm

This corner chisel is used for knocking out rounded corners from a routed hinge recess. Hit once with a mallet and pare out waste. Features: Spring-loaded, aluminium-bodied corner jig High quality tun more→gsten steel Useful for woodworking and general DIY Specifications: Dimensions: H:2.0 x W:3.0 x D:8.0 cm Colour: Red Material: Metal Model Number: CC70

Not available.

Unleash the raw power of your SDS-Max rotary hammer with the BOSCH ACCESORIOS SDS-Max Round Chisel, a robust and durable tool designed for heavy-duty demolition and concrete removal tasks. This 380mm more→long, 35mm diameter chisel delivers maximum impact energy transfer for exceptional performance, making quick work of even the toughest materials. Built with premium quality steel and advanced heat treatment, this chisel offers unparalleled strength, resilience, and longevity, ensuring it withstands the rigors of demanding professional use.The BOSCH ACCESORIOS SDS-Max Round Chisel is engineered for precision and efficiency. Its optimized geometry and sharp cutting edge provide controlled demolition,…