Makita CA5000XJ
Diamond Core Bits & Milling Cutters1445
 |
Solid Carbide rasp/burr. Coarse cut. For grinding, carving and shaping of glass reinforced plastics (GRP). Not suitable for plunge cutting. Use at speed 10000 -30000 RPM. Specifications • Sh more→ank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 20 • Overall Length Metric: 51
 |
Ideal for posts and newel caps for stairs. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 &bul more→l; Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Angle: 60
 |
A keyhole recess for picture hanging flush to the wall. Ref. 35/01 - No.10 & No.12 screw heads. Not suitable for grooving applications. Specifications • Shank Diameter: 1/4 • Dia Metric: more→12.7 • Dia Imperial: 1/2 • Dia2 Metric: 8 • Cut Length Metric: 4.9 • Overall Length Metric: 38.1
 |
They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds more→only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 15.9 • Dia Imperial: 5/8 • Dia2 Metric: 5.55 • Overall Length Metric: 90
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 58
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 16 • Overall Length Metric: 58
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 4 • Dia Imperial: 5/32 • Cut Length Metric: 11.1 • Cut Length Imperial: 7/16 • Overall Length Metric: 60.5
 |
Self-guiding chamfer/bevel cutter. Bearing follows the board beneath. Specifications • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 & more→bull; Overall Length Metric: 60 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Angle: 45
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
