Kress KU704
Cutting Discs308
 |
Cutting Disc Ø125mm X 1mm 50 Units.Specifica
 |
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA120 125mm. 120 grit is suitable for smooth grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.Additional Information:&bu
 |
Die plate for corrugated and most trapezoidal sheet metal.Features:
 |
DeWalt's Laser welded Diamond Cutting Disc is manufactured using advanced bond technology which increases blade productivity and operating life. The blade has a layer of pre-alloyed metal which enclos more→es the diamond creating a pellet that is held more securely and distributed better within the segment. Specifications • Diameter: 125mm • Bore: 22.2mm • Thickness: 2mm • Performance: Extreme • Applications: Cutting Features and Benefits • Pre-alloyed metal layer • Laser welded segments • High quality, low carbon steel core • For use with corded and cordless angle grinders
 |
Up to 2x more precise than Bosch 2607019473 Ceramic Diamond Disc The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefor more→e crucial yet difficult. The EXPERT Hard Ceramic uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch EXPERT Hard …
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
Up to 1.5x faster than a Bosch X431 Flap Disc Flap discs offer a great combination of durability and fast stock removal, and this PRO X571 is even faster than most. The PRO X571 Flap Disc has an X-c more→loth backing for stable grinding. The advanced grain fusion of aluminium oxide and zirconia offers fast stock removal and makes this flap wheel efficient, even when you use it on hardened steel. With 22.23 mm bore for standard locking nut angle grinders Tested in Bosch labs according to Bosch standard procedures. Features and Benefits: • Up to 1.5x faster than a Bosch X431 Flap Disc • With 22.23 mm bore for standard locking nut angle grinders • For grinding metal, eg when removing …
 |
Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonde more→d for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Fine (80 Grit)Bore. 22.23mmAddition
Wire & Cup Brushes343
 |
Price from £2.39 up to £3.59
Compare prices6→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £6.62 up to £7.99
Compare prices6→Compare prices and buy Lessmann Precision End Wire Brush 120mm 12mm 6mm Shank 458.161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush with Shank has the following specification: Wire Type: SteelDiameter: 12mmWire Height: 20mmOverall Length: 120mmWire Gauge: 0.30Max Speed: 15,000/rpmAddit
 |
Price from £17.78 up to £20.95
Compare prices6→Compare prices and buy Lessmann 0.5 Steel Wire Conical Knot Brush 100mm M14 Thread LES471257
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 100mm.Width. 10mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max R.P.M. 12,500Additiona
 |
Price from £6.11 up to £8.99
Compare prices6→Compare prices and buy Faithfull Twisted Knot Wire Cup Brush 65mm M14 Thread WBT65
Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for more→industrial use and more specialist applications.Fa
 |
Price from £6.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
Designed for cleaning stainless steel Are you a metalworker looking for a long-lasting end brush to help you get a good fine finish on small steel surfaces? Try the PRO Stainless Steel clean. We fitt more→ed it with high-quality crimped wire, so you can rest assured you can tackle any lighter cleaning jobs – time and again. The PRO Stainless Steel clean End Brush is a durable accessory you want to keep at hand in your metal shop. Thanks to its shape and small size, you can use to clean small steel surfaces, corners, profiles, and pipes. We fitted it with premium crimped wire to ensure it'll help you with lighter cleaning tasks. Cylindrical shank compatible with three-jaw drill chucks Features an…
 |
Price from £6.49
Compare prices5→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 100mm 6mm Shank STA36010
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 100mm • Wheel Thickness: 12mm • Shank Diameter: 6m
 |
Price from £12.01 up to £19.99
Compare prices7→Compare prices and buy Faithfull Flat Wire Brush Knot 115Xm14X2 0,35Mm S, Multi FAIWBCT115S
Flat Twist Knot Wire Brush, compatible with 115mm (4.1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Perfect for more→use on stainless steel. Standard wire brushes when used on stainless steel can contaminate and cause the material to rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Features: For the removal of slag, rust, scale or even dried cement Compatible with 115mm angle grinders Compatible with 115mm angle grinders Perfect for use on stainless steel Specifications: Dimensions: H:14.0 x W:2.5 x D:12.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBCT115S
 |
Price from £24.99 up to £35.95
Compare prices7→Compare prices and buy Bosch Accesorios Clean Metal 100x0.5x180 Mm M14 Brush Cup 1608614011
Clean For Metal Wire Cup Brush Provides An Extra-Fine Surface Finish. Brush Wires Are Available In Different Thicknesses For Variable Levels Of Abrasive Needs. Thicker Wires Are More Aggressive, Produ more→cing A Coarser Yet Faster Surface Finish, While Thinner Wires Deliver Finer, Smoother Surface Results. It Is Intended For Use With Angle Grinders With An M14 Thread.Features
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.