Festool OF 2200 EB-Plus 576218
Diamond Core Bits & Milling Cutters3068
 |
These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 1/2 • Dia Metric: 5 • Cut Length more→Metric: 13 • Cut Length Imperial: 1/2 • Overall Length Metric: 66 • Radius 1 Metric: 2.5
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 7.14 • Cut Length Imperial: 9/32 • Bearing Dia Metric: 22.2 • Bearing Dia Imperial: 7/8 • Sawbore: 9.5 • Sawbore Imperial: 3/8
 |
A set of 6 popular sizes of Dormer G106 HSS countersinks with Tri-Flat shank supplied in a plastic case. Specifications G1066.3 • Diameter: 6.3mm • Length: 45mm • Shank Diameter: 5mm G1 more→068.3 • Diameter: 8.3mm • Length: 50mm • Shank Diameter: 6mm G10610.4 • Diameter: 10.4mm • Length: 50mm • Shank Diameter: 6mm G10612.4 • Diameter: 12.4mm • Length: 56mm • Shank Diameter: 8mm G10616.5 • Diameter: 16.5mm • Length: 60mm • Shank Diameter: 10mm G10620.5 • Diameter: 20.5mm • Length: 63mm • Shank Diameter: 10mm Please Note: Stock image shown for illustration only. Refer to description for contents. Features and …
 |
The long cut depth of these cutters allows them to produce under-cut finger grooves. Specifications • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 32 • Overall Length more→Metric: 70 • Radius 1 Metric: 12.5
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 5.0mm • Shank Diameter: 4mm • Overall Length: 40mm • Capacity: 1.5mm - 5.0mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 20.5mm • Shank Diameter: 10mm • Overall Length: 63mm • Capacity: 3.5mm - 20.5mm Features and Benefits • more→Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Ideal for posts and newel caps for stairs. Specifications • Shank Diameter: 1/4 • Dia Metric: 35.1 • Cut Length Metric: 7 • Cut Length Imperial: 9/32 • Overall Length Metric: more→61.5 • Bearing Dia Metric: 9.5 • Angle: 30
 |
The DeWalt four cutter countersink provides a clean, professional finish. They are ideal for drilling pilot holes and countersinking in one action and can be used on hard and soft wood, composite boar more→d and MDF. Features & Benefits • Four cutter countersink and tapered drill bit provide superior speed and ideal finish • Replacement tapered bits offered • Can be used on hard and soft wood, composite board and MDF Specifications • Accessory type: No. 12 Pilot Bit and No. 4 Countersink Cutter • Shank: 5/16"
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.