Festool OF 2200 EB-Plus 574349
Diamond Core Bits & Milling Cutters1751
 |
Trend TR29 Trade range Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber man-made board. Features 2 mm micrograin tungsten carbide tips for cutting the most more→abrasive materials to give extra long life. The cutter is PTFE coated indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood fibreboard plywood and particle board and has the dimensions etched on the extra long 40 mm shanks for quick identification. Dimensions:Shan
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 4 • Dia Imperial: 5/32 • Cut Length Metric: 11 • Overall Length Metric: 60
 |
Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 63 • Overall Length Metric: 115 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 6 more→.3 • Dia Imperial: 1/4 • Cut Length Metric: 19 • Overall Length Metric: 61
 |
Countersink set in DIAL-A-TOOl container consisting out of 6 G136 countersinks with a 90 chamfering angle
 |
1/4 Core Box 12.7 x 6.35mm Radius TCT Router BitPTDDRPDIR75345"
 |
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 4/60 x 1/4 TCT Two Flute Cutter has the following specification: D: 25mm (63/64in)C: 25mmOL: 56mmShank Diameter: 1/4inPTDTRE4701
 |
Trend Craft Pro 1/2in shank double bearing guided trimmer cutter - 12.7mm diameter Two Flute Carbide tips. Top and bottom bearings allows the work to be fed with bottom or top template to prevent tea more→r out on short grain for a premium finish. 50mm cutting depth for replicating deep profiles cleanly and professional. Double bearing is ideal for router table work. Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and veneers. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications • …
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.