Festool Domino DF 500 Q-Set 576420
Diamond Core Bits & Milling Cutters1728
 |
Trend Craft Pro 1/4in shank 'V'groove cutter 12.7mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based ma more→terials. 60¡ 'V' groove profile ideal for false panel work, chamfering and grooving details. Fine point and acute angle detail especially suited to freehand engraving and template letter work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length M…
 |
Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Co more→rners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 4/24 x 1/2 TCT Two Flute Cutter has the following specification: D: 15.9mm (5/8in)C: 63mmOL: 105mmShank Diameter: 1/2inPTDTRE4241
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 3.2 • Dia Imperial: 1/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 61
 |
Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel ground with a very fine edge. Generally HSS cutters are slightly less expensive than their TC grades but can be more→more suitable for certain applications. Suitable for general grooving and rebating. Suitable for non abrasive materials but will give a superior finish in soft timbers. Specification D: 6.3mm (1/4in)C: 28mmOL: 59mmShank Diameter: 1/4inPTDTRE3211
 |
These dovetail cutters produce a tight reliable joint for drawers, boxes etc. Refs. C154 & C041A can be used with Trend CDJ300, CDJ600 & DJ300 dovetail jigs. To suit user preference, the table sho more→ws angles from the horizontal and the profiles show angles from the vertical. Specifications • Shank Diameter: 8 mm • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 61 • Angle: 104
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 61.5
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 11.5mm • Shank Diameter: 8mm • Overall Length: 56mm • Capacity: 2.8mm - 11.5mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 63 • Overall Length Metric: 105
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.