Einhell Professional TP-RO 18 Li BL Set (1x5.2Ah)
Diamond Core Bits & Milling Cutters338
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56
 |
1/2 Straight 12.7 x 50mm TCT Router BitPTDDRPDIR75350"
 |
The Dormer G136 HSS 90° Countersink is designed to provide precise and efficient cutting for countersunk-hea
 |
Series G136 HSS Straight Shank 90 Countersink The Dormer G136 Series 90 countersink has a three flute geometry that is precision ground to ensure the highest levels of performance when producing 90 more→countersinks or when used as a deburring tool. Manufactured to DIN335C
 |
Drilling and Countersinking in One Step - The Brad Point Drill Bit with Countersink efficiently drills, countersinks and deburrs in one step in wood. Mounted on a brad point drill bit, all three opera more→tions are achievable at once. The countersink is suitable for use on hard and soft wood, laminated and non-laminated chipboard and plywood. It is intended for use in drill stands and drill drivers. This multi-functiona
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 10.0mm • Shank Diameter: 6mm • Overall Length: 50mm • Capacity: 2.5mm - 10.0mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Drilling and Countersinking in One Step - The Brad Point Drill Bit with Countersink efficiently drills, countersinks and deburrs in one step in wood. Mounted on a brad point drill bit, all three opera more→tions are achievable at once. The countersink is suitable for use on hard and soft wood, laminated and non-laminated chipboard and plywood. It is intended for use in drill stands and drill drivers. This multi-functiona
 |
Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Co more→rners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 3/83 x 1/2 TCT Two Flute Workshop Cutter has the following specification: D: 12.7mm (1/2in)C: 50mmOL: 108mmShank Diameter: 1/2in For use with professional routers that have a 80mm deep plunge. One piece multi-slit collet to ensure safe cutter retraction into base. Designed for hollow honeycomb board worktops.PTDTRE
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.