Einhell Expert TE-AG 125 CE (4430860)
Cutting Discs202
 |
Turbo Cut Diamond Blade designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blade excels in very hard m more→aterials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate. Features: Faster cutting than standard sintered segmented blades For cutting very hard materials including hard concrete, class A engineering bricks, reinforced concrete lintels, kerbs, granite and hard slate etc For cutting very hard materials including hard concrete, class A engineering …
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
 |
The CorePlus Mortar Raking Diamond Blade has hard, 10mm tall segments, specifically designed for removing a range of mortars prior to pointing. A precision-engin
 |
The Tiles Used In Modern Construction Are Often Large, Very Hard And Expensive. Cutting Them To A High Standard Every Time Is Therefore Crucial Yet Difficult. The Expert Hardceramic Tile-Cutting Disc more→Uses Diamond Technology And A Range Of Design Features To Deliver The Best Results Consistently, Even In The Hardest Ceramics. The Bosch Expert Hardceramic X-Lock Diamond Tile Cutting Disc Offers The Best Cut In Hard Tiles. You Can Be Confident Of Achieving A Professional Finish On Every Job With This Diamond Cutting Disc.Features: - Clean, High Quality Cutting With Bosch Diamond Technology.- Chip-Free Cut With Purpose-Designe
 |
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …
 |
• For light grinding work. Thanks to the flexibility of the disc, it is ideally suited to working on curved surfaces. Other advantages of the disc: less vibration and noise development, cool grin more→ding (less heat discolouration)
 |
Lasts up to 1.5x longer than a Bosch Standard for Metal Disc (2608619767) Looking for a long-lasting cutting disc to cut stainless steel and metal? Try the PRO Stainless Steel and Metal. We made it w more→ith premium abrasive grains so that you can enjoy its performance for a long time. The PRO Stainless Steel and Metal Bonded Cutting Disc uses premium aluminium oxide grains to ensure you get fast and efficient cuts in stainless steel and metal. We combined the grains with functional fillers and embedded them in a phenol resin matrix for strength, resistance to heat and stable performance. We reinforced the disc with a high-quality fibreglass net to make sure it's safer to use. Plus, we made it …
 |
Up to 3x faster than Bosch X431 Disc Professional metalworkers take pride in the beauty of a finished surface, but surface finishing can be a time consuming job. By minimising the process steps requi more→red to achieve a perfect finish, the EXPERT N475 SCM Disc ensures efficiency without compromising on quality. Part of the Bosch Surface Structure range of advanced abrasives, the EXPERT N475 SCM Disc combines the toughness of aluminium oxide grits with a 3D non-woven structure to give a fast cutting SCM which does not smear. These discs are ideal for refining #36 fiber disc scratches on mild steel. Offering time savings to the professional by saving process steps without compromising on quality,&hellip
Wire & Cup Brushes294
 |
Price from £2.28 up to £2.99
Compare prices6→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £14.99 up to £35.95
Compare prices6→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 80mm M14 x 2.0 Thread LES484217
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 80mmBore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max. R.P.M. 8,500.Additiona
 |
Price from £11.52 up to £18.99
Compare prices7→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock, Multi FAIWBT75XL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish from steel surfaces. The X-LOCK quick change system ensures a fast, reliable and effective one clic more→k change between tools when used with a compatible angle grinder. Features: Use on steel X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools 0.5mm twist knot steel wire Specifications: Dimensions: H:11.5 x W:6.0 x D:9.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT75XL
 |
Price from £9.28 up to £9.95
Compare prices7→Compare prices and buy Sealey Brassed Wire Cup Brush 100mm M14 Thread CBC100
Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Features & Benefits: • Suitable for use with power tools up to th more→e maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC100 Specifications: Model No CBC100 Brand: Sealey Diameter: Ø100mm Maximum Speed: 8500rpm Nett Weight: 0.38kg Thread: M14 x 2mm
 |
Price from £9.80 up to £11.95
Compare prices5→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 60mm M14 x 2.0 Thread LES421167
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £3.24 up to £4.99
Compare prices6→Compare prices and buy Faithfull Crimped Wire Cup Brush 60mm M14 Thread WBC60
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.Th
 |
Price from £11.20 up to £11.99
Compare prices7→Compare prices and buy Sealey 5 Piece Brassed Wire Brush Set BWBS05
Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Contents: Brushes; Wire Cup; 50mm, 75mm, Flat Wire; 50mm, 75mm, 25 more→mm Decarbonising/C
 |
Price from £4.95
Compare prices5→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank STA36020
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
