Einhell Classic TC-AG 125/1 (4430971)
Cutting Discs186
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
 |
Up to 1.5x faster than a Bosch X431 Flap Disc Flap discs offer a great combination of durability and fast stock removal, and this PRO X571 is even faster than most. The PRO X571 Flap Disc has an X-c more→loth backing for stable grinding. The advanced grain fusion of aluminium oxide and zirconia offers fast stock removal and makes this flap wheel efficient, even when you use it on hardened steel. With 22.23 mm bore for standard locking nut angle grinders Tested in Bosch labs according to Bosch standard procedures. Features and Benefits: • Up to 1.5x faster than a Bosch X431 Flap Disc • With 22.23 mm bore for standard locking nut angle grinders • For grinding metal, eg when removing …
 |
Designed for cutting metal Need a long-lasting cutting disc to make fast cuts in metal? Try the PRO Metal. We made it using high-quality abrasive grains for strength and durability. We made the dura more→ble PRO Metal Bonded Cutting Disc with premium aluminium oxide grains to make sure it cuts effectively. And combined the grains with functional fillers and embedded them in a phenol resin matrix for strength and resistance to heat. We reinforced the disc with a high-quality fibreglass net for safer and more stable performance. With 22.23 mm bore for standard locking nut angle grinders Features and Benefits: • Designed for cutting metal • With 22.23 mm bore for standard locking nut angle …
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. More durable than aluminium oxide flap discs. Abrasive flaps are attached to rigid dis more→c with epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools. Features & Benefits: • Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • More durable than aluminium oxide flap discs. • Abrasive flaps attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø125/22mm. • Model No. FD12560 Spe…
 |
FEATURES:- For reliable cutting in concrete- Optimized diamond matrix in high quality standard for solid results- The Bosch Diamond Competence Center in Switzerland ensures consistent quality
 |
The Makita Ultra Thin Metal Cutting Disc is a high quality stainless steel cutting disk with an extra thin kerf. Desiged for cutting stainless steel the disk will give a perfect cutting finish everyti more→me. Specifications • Blade Diameter: 125mm • Bore Size: 22.23mm • Thickness: 1.2mm Features and Benefits • Designed for cutting stainless steel / inox / aluminium - extrusions, welds, sections, trunking, pipes
 |
The Milwaukee Pro+ Thin Metal Cutting Discs are iron and sulphur free top line thin cut-off wheels for all steels. Best suitable for stainless (except the 350 x 4mm) and acid-resistant steel, hardox, more→heat-resistant cast steel, spring steel, mild and tool steel. Features & Benefits • 50% less cutting time and 50% less dust than standard 3 mm thick discs. • Lower material loss. Specifications • Bore Size: 22.2mm • Disc Diameter: 125 • Thickness: 1mm • Pack Quantity: 10
Wire & Cup Brushes221
 |
5.06Buy!
£
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indus more→trial use and more specialist applications.Wi
 |
Price from £2.82 up to £3.49
Compare prices6→Compare prices and buy Sealey Flat Top Brassed Decarbonising Brush 24mm 6mm Shank VS1803
Flat trimmed brush with brassed and crimped filaments for extra rigidity. Ø6 x 26mm Shaft. Features & Benefits: • Flat trimmed brush with brassed and crimped filaments for extra rigidity. • Ø6 x 26mm more→Shaft. • Trim Length/Diameter
 |
Price from £16.95
Compare prices5→Compare prices and buy Bosch Conical 0.35mm Inox Crimped Wire Wheel 100mm M14 Thread 2608622108
Designed for cleaning stainless steel Standard cup brushes work fine on larger surfaces, but they are not always the best choice when you need to clean a workpiece with areas that are hard to reach. more→The durable PRO Stainless Steel clean Bevel Brush has a sloping shape, so you can get at tighter spots easier. The PRO Stainless Steel clean Bevel Brush is a durable accessory you want to have at hand in your metal shop. We fitted it with premium knotted wire to ensure it will get your lighter cleaning jobs done. The sloping position of the wires helps you get at smaller steel surfaces, grooves, and edges easier – time and again. Fits all M14 angle grinders Features and Benefits: • Designed fo…
 |
Price from £4.37 up to £5.95
Compare prices5→Compare prices and buy Faithfull Crimped Wire Cup Brush 75mm M14 Thread WBC75
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.Wi
 |
Price from £14.95
Compare prices5→Compare prices and buy Bosch X Lock Crimped Wire Wheel 115mm X-Lock 2608620732
Designed for cleaning steel Need a durable wire wheel to clean small metal surfaces, edges, and in grooves? Try the PRO Metal clean. We fitted it with high-quality crimped wire to ensure it will help more→you with lighter cleaning tasks – time and again. The PRO Metal clean Wire Wheel is made with premium crimped wire to ensure you’ll get a fine finish on small metal surfaces, edges, and grooves. It will help you tackle rust, old paint, and discolouring on welded seams. You can also use it for any roughing and matt sanding jobs. The brush wire wheel will be a long-lasting addition to any metal shop. Click it on with X-Lock Features and Benefits: • Designed for cleaning steel • Click it o…
 |
Price from £2.12 up to £2.95
Compare prices5→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBS50
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £6.62 up to £7.99
Compare prices6→Compare prices and buy Lessmann Precision End Wire Brush 120mm 12mm 6mm Shank 458.161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush with Shank has the following specification: Wire Type: SteelDiameter: 12mmWire Height: 20mmOverall Length: 120mmWire Gauge: 0.30Max Speed: 15,000/rpmAddit
 |
Price from £4.99 up to £6.95
Compare prices7→Compare prices and buy Sealey Flat Stainless Steel Wire Brush 100mm 6mm Shank SFBS100
Flat wire brush with crimped stainless steel filaments, Ø100mm width and a Ø6mm shaft. Features & Benefits: • Flat wire brush. • Crimped stainless steel filaments. • Shaft: Ø6mm. • Diameter: Ø100mm. more→• Maximum Speed: 4500rpm. • Model No. SFBS100 Specifications: Model No SFBS100 Brand: Sealey Diameter: Ø100mm Maximum Speed: 4500rpm Nett Weight: 0.11kg Shaft Diameter: Ø6mm
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.