DWT SBH-07-22 T BMC (86215)

These Soft Grip Wood Chisels are ideal for the professional tradesman or keen DIY enthusiast. Manufactured from drop-forged chrome vanadium steel that is hardened and tempered to exacting standards to more→ensure that the cutting edge remains sharper for longer. The bevelled edge blade design makes these chisels ideal for cutting into tight corners and for use on fine work. The handles have an anti-slip, soft grip coating for added user comfort and are fitted with a steel striking cap that provides added protection when used with a mallet or an occasional hammer blow. FAIWCSGS4CR: Set of 4, Chisel Roll: 13, 19, 25, 32mm.FAIWCSGS6WB: Set of 6, Wooden Case: 6, 10, 13, 19, 25, 32mm. Features: Hardened …

The DEWALT Self-Feed Drill Bits are ideal for drilling clean holes in wood MDF hardboard and chipboard. They have two sharp cutting edges and an aggressive 'self-feed' spur for rapid penetration int more→o the material. They are fitted with a non-slip shank for better chuck bit retention. For use with corded and cordless drills.These DEWALT Self-Feed Drill Bits have the following specification: Diameter: ;68mm.PTDDEWDT4586QZ

Supplied with hex drive adaptor for matched balance and extractor drift. Thick wall body with multi slot extraction and 8mm high diamond segments. High-speed drilling when used on lightweight building more→material such as; soft stone, facing bricks, breeze blocks and insulation blocks. (Not suitable for reinforced or non-reinforced concrete.) For dry drilling only. Supplied with integral hex shanks. Features: • Supplied with hex drive adaptor for matched balance and extractor drift • Thick wall body with multi slot extraction and 8mm high diamond segments • High-speed drilling when used on lightweight building material such as; soft stone, facing bricks, breeze blocks and insulation …

30mm Bormax 2.0 Prima Pilot Guided Forstner Bit, 1624030 The pilot-drill bit is ideal for drilling at an angle which is not 90 in workpieces sufaces. Can be used with the centre point as traditinal Bo more→rmax., 1624, 1624030

The Vitrex Dry Cut / Wax Filled Drills have a diamond grit edged bit to provide a faster superior cut and give them an increased life. The bits are wax filled so there is no need for water. Ideal for more→drilling in all tile types including porcelain.Vitrex Dry Cut / Wax Filled Drill 6mmPTDVITWAXD006

Fully ground HSS Cobalt drill bit manufactured to DIN 338. 5% Cobalt gives increased heat hardness which helps extend the life of the drill bit. 135° Split point is self-centring which helps to reduce more→thrust and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for drilling high carbon and stainless steel. High-density case for safe storage. Features: • Fully ground HSS Cobalt drill bit manufactured to DIN 338 • 5% Cobalt helps to increase life of drill bit • 135° Split point is self-centring for easier penetration • Efficient clog-free swarf clearance • Suitable for drilling high carbon steel and stainless steel • High-density case for sa…

Scaling Chisel Straight Steels are produced to provide high-performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such more→as hammer work on chisels and drop stamp forging of cutting blades, they fit the most popular 21mm Hex shank machines used in the UK. Type: Scaling Chisel.Length: 300mm. Width: 75mm.Fitting: 21mm Hex shank, Kango (900/950K). Features: Manufactured using traditional forging skills such as hammer work Kango (900/950K) shank Kango (900/950K) shank Specifications: Dimensions: H:30.0 x W:2.5 x D:7.5 cm Colour: Silver Guarantee:5 years Material: Metal Model Number: FAIKAGSC75

Not available.

A Silverline 4-piece Expert Wood Chisel Set containing 6mm, 13mm, 19mm and 25mm chisels with hardened and tempered bevel edged blades and soft-grip handles.

The Sds Max Flat Chisel Provides Standard Chiselling For Various Demolition Applications In Concrete And Brick. Good Material Removal On Light Applications Is Made Possible By The Flat Cutting Edge. T more→he Chisel Is Intended For Use In Applications Such As Mortising, Demolition And Adjustment Work, As Well As For Restoring Joints And Clearing Reinforcements. It Is Compatible With Sds Max Shank Systems.Specifications: - Length: 400 Mm- Product Type: Rotary Hammer Chisel Attachment- Chisel(S) Cutting Edge: 25 Mm

Faithfull SDS Max Chisel Steels are produced to provide high-performance in all types of modern large capacity drilling and hammer drilling machines. Manufactured using traditional forging skills such more→as hammer work on chisels and drop stamp forging of cutting blades they fit the most popular machines used in the UK. Type: Chisel.Fitting: SDS Max.FAIMAXC300Length: 300 mm Width: 25 mmPTDFAIMAXC300

Pointed Chisel a constantly high material removal rate and an efficient work flow. The self-sharpening Pointed Chisel offers a 30%-higher material removal rate compared to standard pointed chisels. It more→is compatible with TE-S systems.Features:- Fast work progress due to self-sharpening feature- Special star shape at the working end retains the shape of the tool to prevent work interruptions.- With 22 mm hex shank for demolition hammers.- Self-sharpening feature for 30%-higher material removal rate compared to standard pointed chiselsSpecifications:- Total length mm: 400- Shank, shape: Hexagon