DWT KF 06-30 (748663)
Diamond Core Bits & Milling Cutters7552
 |
3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications • Shank Diamet more→er: 1/2 • Dia Metric: 24.3 • Cut Length Metric: 50 • Overall Length Metric: 101 • Bearing Dia Metric: 19 • Angle: 3
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/2 • Dia Metric: 63.5 • Cut Length Metric: 32 • Overall Length Metric: 91.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 25.4 • Radius 1 Imperial: 1
 |
Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 11mm • Shank Diameter: 12mm • Length of Cut: 41.5mm • Overall Length: 89mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 3 more→.2 • Dia Imperial: 1/8 • Cut Length Metric: 11 • Overall Length Metric: 59
 |
2S342-1905-483CMB1740 Plura Solid Carbide End Mill by Sandvik Coromant
 |
Can be used to make single, double or corner beads. Specifications • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 19 • Overall Length Metric: 59.3 • Bearing Dia more→Metric: 16 • Radius 1 Metric: 3
 |
Trend Craft Pro 1/4in shank bearing guided trimmer cutter - 12.7mm diameter Triple Flute Carbide tips. Triple flute carbide TCT tips ensure the cleanest of finishes on timber, plastic laminates and v more→eneers. 25mm cutting depth, ideal for replicating shallow components with templates. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow patterns and templates. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 …
 |
Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects. Can be used on wood and plastic. Small bearing allows access to tight spaces. Has a more→miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced. Specifications • Shank Diameter: 1/4 • Dia Metric: 4.8 • Cut Length Metric: 12 • Overall Length Metric: 51 • Bearing Dia Metric: 4.8 • Angle: 90
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.