DeWALT DW621KT
Diamond Core Bits & Milling Cutters1703
 |
Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 12.7mm cutting depth bearing guided profiling cutter, perfect for temp more→lating and trimming work in timber, laminate and wood based materials. Shank mounted bearing allows good vision of the template for easy and accurate following when hand held routing. Ideal for forming curved rebates and grooves with templates for increased diversity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • …
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 4.8 • Radius 1 Imperial: 3/16
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. Specific more→ations • Shank Diameter: 8 mm • Dia Metric: 19.4 • Dia Imperial: 3/4 • Cut Length Metric: 9.2 • Overall Length Metric: 56 • Angle: 45
 |
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 3/8 x 1/4 TCT Two Flute Cutter has the following specification: D: 12mm (15/32in)C: 19mmOL: 51mmShank Diameter: 1/4inPTDTRE3814
 |
Ideal for producing nosings and attractive edge moulds. Beads Ref. 9/11 has a matching cutter Ref. 8/11 for jointing & hinging. Specifications • Shank Diameter: 1/4 • Dia Metric: 24 &bull more→; Cut Length Metric: 10 • Overall Length Metric: 60 • Radius 1 Metric: 5
 |
Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
 |
Ideal for fast chamfering to remove edge on timber or create a decorative edge. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric more→: 53 • Angle: 45
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 12.4mm • Shank Diameter: 8mm • Overall Length: 56mm • Capacity: 2.8mm - 12.4mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.