DeWALT DCW620NT
Diamond Core Bits & Milling Cutters1643
 |
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.3 • Cut Length Metric: 14.3 • Cut Length Imperial: 9/16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 3 more→• Cut Length Metric: 11 • Overall Length Metric: 59
 |
Trend Professional HSSE 8mm shank straight router cutter - 8mm diameter for aluminium and plastics 8mm diameter X 14mm cut length for specialist routing of UPVC, aluminium and anodised aluminium on C more→NC machines. The ideal cutter for slotting, grooving and milling clean accurate apertures for aluminium components. Single flute helical up cut for shearing cut and fast clearance of waste for the cleanest of cuts. Manufactured from special grade HSSE for increased durability when machining the most abrasive anodised finishes. 8mm shank for increased support under load. With 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 8 mm • Dia Metric: 8 • …
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 61
 |
Drilling and Countersinking in One Step - The Brad Point Drill Bit with Countersink efficiently drills, countersinks and deburrs in one step in wood. Mounted on a brad point drill bit, all three opera more→tions are achievable at once. The countersink is suitable for use on hard and soft wood, laminated and non-laminated chipboard and plywood. It is intended for use in drill stands and drill drivers. This multi-functiona
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 16.5mm • Shank Diameter: 10mm • Overall Length: 60mm • Capacity: 2.5mm - 16.5mm Features and Benefits &bull more→; Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. Specific more→ations • Shank Diameter: 1/4 • Dia Metric: 19.4 • Dia Imperial: 3/4 • Cut Length Metric: 9.2 • Overall Length Metric: 56 • Angle: 45
 |
1/4" Straight 6.35 x 25mm TCT Router Bit Contents 1 x TCT Router Bit, 1/4" Straight, 6.35 x 25mm
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.