DeWALT D26204K 110V
Diamond Core Bits & Milling Cutters859
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 11 • Dia Imperial: 7/16 • Cut Length Metric: 25 • Overall Length Metric: 69
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 3 • Cut Length Metric: 11 • Overall Length Metric: 50.5
 |
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and more→below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications • Shank Diameter: 1/4 • Dia Metric: 1 • Cut Length Metric: 3 • Overall Length Metric: 49 • Type or Grade: Solid Carbide Insert
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 7.1 • Dia Imperial: 9/32 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 67.5
 |
Manufactured from a Cobalt-based HSS (M42), a premium grade high speed tool steel, heat treated to surpass the hardness of other HSS materials. The increased cobalt content helps retain hardness at el more→evated temperatures. This increased hot hardness makes the material especially suited for machining stainless steels and temperature resistant alloys. It also gives the material increased wear resistance needed for machining in highly abrasive cutting applications. M42 is also a very tough grade and can therefore cope with the most aggressive applications in most materials. The Aluminium Titanium Carbo-Nitride (AlTiCN) multilayer coating has a hardness of 3700HV which surpasses many other nitride …
 |
With a 10mm size, this hex wood countersink is versatile and perfect for creating clean and precise recessed holes in wood surfaces. The hex design ensures a secure grip and easy integration with vari more→ous drills, providing optimal control during operation. Crafted with durability as a top priority, the Stanley Hex Wood Countersink withstands the demands of frequent use. Its robust construction ensures a longer lifespan, making it a reliable and enduring asset in your toolkit. Tackle various woodworking tasks with confidence, knowing that this Stanley countersink bit is up to the challenge. The precision of the countersink is enhanced by the hex design, providing stability, and preventing slippage …
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 16mm • Shank Diameter: 16mm • Length of Cut: 26.5mm • Overall Length: 80mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
High quality 3-flute countersink bit for deburring, chamfering and countersinking. A finely-tuned material elasticity provides for great durability. Perfect chip removal and a low tilt risk ensure ple more→asant working. Cutting section as per DIN 335-C, 90° with 3 cutters. ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 846 3-flute Countersink Bit, 20.50 x 41 mm
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.