Bosch GWS 14-125 CI Professional 06018242F0
Cutting Discs235
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 125mm • Bore: 22.23mm • Ring: 20mm • Pack Quantity: 1
 |
Up to 3x faster than Bosch X431 Disc Professional metalworkers take pride in the beauty of a finished surface, but surface finishing can be a time consuming job. By minimising the process steps requi more→red to achieve a perfect finish, the EXPERT N475 SCM Disc ensures efficiency without compromising on quality. Part of the Bosch Surface Structure range of advanced abrasives, the EXPERT N475 SCM Disc combines the toughness of aluminium oxide grits with a 3D non-woven structure to give a fast cutting SCM which does not smear. These discs are ideal for refining #36 fiber disc scratches on mild steel. Offering time savings to the professional by saving process steps without compromising on quality,&hellip
 |
Lasts up to 100x longer than Bosch 2608619767 Cutting Disc Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemi more→cal smell of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, pro…
 |
The Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety. The disc is composed of high-quality silicon carbide and resin specifically designed for work on s more→tone with impressive results. The disc's precision-manuf
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
The Makita Ultra Thin Metal Cutting Disc is a high quality stainless steel cutting disk with an extra thin kerf. Desiged for cutting stainless steel the disk will give a perfect cutting finish everyti more→me. Specifications • Blade Diameter: 125mm • Bore Size: 22.23mm • Thickness: 1.2mm Features and Benefits • Designed for cutting stainless steel / inox / aluminium - extrusions, welds, sections, trunking, pipes
 |
Up to 1.5x faster than a Bosch X431 Flap Disc Flap discs offer a great combination of durability and fast stock removal, and this PRO X571 is even faster than most. The PRO X571 Flap Disc has an X-c more→loth backing for stable grinding. The advanced grain fusion of aluminium oxide and zirconia offers fast stock removal even in hardened steel. Click it on with X-LOCK or use it with nut and thread angle grinders Tested in Bosch labs according to Bosch standard procedures. Features and Benefits: • Up to 1.5x faster than a Bosch X431 Flap Disc • Click it on with X-LOCK or use it with nut and thread angle grinders • For grinding metal, eg when removing welds and stock on mild steel …
 |
For General Construction Materials - The Eco for Universal Segmented Diamond Disc is the preferred choice for reliable cuts in general construction materials. Its sintered cutting segments deliver goo more→d performance in a variety of materials including concrete, brick, limestone and roofing tile. The diamond disc is suitable for use with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits: • For Reliable Cuts in General Construction Materials • Eco for Universal Segmented Diamond Disc is the preferred choice for reliable cuts in general construction materials • Sintered cutting segments for good performance in a variety of materials …
Wire & Cup Brushes312
 |
Price from £5.21 up to £7.49
Compare prices6→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set set 1 07435 (3 Piece)
This Set Of Wire Brushes Is Designed For Light To Medium-Duty Work And Delivers Rapid Stock Removal From A Wide Variety Of Surfaces. The Brushes Are Made From Hardened Dipped Brassed Steel Wire Which more→Gives A High Level Of Durability And Resistance To Oxidation. The Brushes Are Strong Enough To Provide Reliable Performance And The Crimping Is Flexible To Tackle Recessed Areas And Irregular Surfaces. The Set Includes A 25Mm Wire End Brush 50Mm Wire Cup Brush And A 50Mm Wire Wheel Brush. Fitted With A Non-Slip 6.35Mm Hex Shank. Compatible With Most Drill Drivers And Drills With A 13Mm Chuck.PTDDRPDIR
 |
Price from £3.24 up to £4.99
Compare prices6→Compare prices and buy Faithfull Wire Cup Brush 60mm M14x2, 0.30mm Steel Wire FAIWBC60
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indus more→trial use and more specialist applications.
 |
Price from £30.05 up to £32.95
Compare prices5→Compare prices and buy Lessmann 456.278 Knot End Brush With Shank 29Mm 0.35 Steel Wire LES456278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.PTDLES456
 |
Price from £6.06 up to £7.49
Compare prices6→Compare prices and buy Sealey CWB100 Conical Wire Brush Ø100Mm M10 X 1.5Mm
Suitable for use with power tools up to the maximum rated rpm. Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Ø100mm Conical Wire Brush M10 x 1.5mm• Suitab more→le for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.• Model No. CWB100Model No: CWB100:Brand: Sealey:Diameter
 |
Price from £45.78 up to £48.95
Compare prices5→Compare prices and buy Lessmann 472.811 Knot Wheel Brush 115 X 14Mm 22.2Mm Bore 0.50 Stainless Steel Wire LES472811
The Lessmann Knot Wheel Brushes are for grinders angle grinders and stationary machines used in the preparation and re-working of bolt fillet and butt welds. They remove scale rust paint slag ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Stainless Steel.Max RPM: 12 500/min.PTDLES4
 |
Price from £3.22 up to £6.39
Compare prices7→Compare prices and buy Draper 41432 Brassed Steel Crimped Wire Cup Brush 50Mm each 1
This wire cup brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck.PTDDRPDIR
 |
Price from £5.64 up to £7.49
Compare prices6→Compare prices and buy Makita D-66070 Wire Brush Set For Drill MAK-D-66070 (3 Piece)
Makita D-66070 Wire Brush Set for Drill (3 Piece)The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
 |
Price from £5.00 up to £6.49
Compare prices5→Compare prices and buy BlueSpot Tools 19216 Twist Knot Cup Brush 100Mm M14 X 2 B/S19216
BlueSpot Tools Twist Knot Cup Brushes are manufactured from hardened steel wire for increased durability. Twisted steel filaments provide quick and efficient cleaning action. Ideal for removal of dirt more→paint rust scale slag concrete and other hardened materials.This BlueSpot Tools Twist Knot Cup Brush has the following specifications: Diameter: 100mm (4in) / M14 x 2 Fitting.Max. Safe Speed: 8500 RPM.PTDB/S19216
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.