AEG BOF18BL2-0 (4935479163)
Diamond Core Bits & Milling Cutters8336
 |
Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk. Specificatio more→ns • Shank Diameter: 1/2 • Dia Metric: 29 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 60 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4
 |
Product Range: CoroMill 331Multi-purpos
 |
1/2" Straight 12.7 x 25mm TCT Router Bit Contents 1 x TCT Router Bit, 1/2" Straight, 12.7 x 25mm
 |
For 4.0mm thick strip. For 15.0mm wide intumescent strip. Specifications • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 15 • Overall Length Metric: 68 • Bearing more→Dia Metric: 32 • Rebate Metric: 4
 |
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised P more→anel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm hank tools are for use with medium and heavy duty routers only. Suitable panel mould for use with Ref. PSC/5. Available as set Ref. PDS/5. Specifications • Shank Diameter: 1/2 • Dia Metric: 86 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 71 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 …
 |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Downcut to prevent breakout on veneer. Specifications • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 14 • Overall Length Metric: 60 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4
 |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximat more→e 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38.1 • Overall Length Metric: 106 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2
 |
Product Range: CoroMill PluraTool Type: Thread millingSmall diameter shoulder milling with close tolerancesCoroM
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.