Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm

PowerToolsDirect.com →	£81.00	Tooled-up.com →	£82.95
Mytoolshed.co.uk →	£82.95	Tooled-up.com →	£82.95
Zoro.co.uk →	£89.99	MyTyres.co.uk →	£145.18
Protyre.co.uk →	£146.17

Buy Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm

When you make a purchase through links on our site, we may receive a affiliate commission.


	Lindstrom 7291 Supreme Oblique Cutting Flush Cut Double Angled Head Nipper 108Mm LIN7291 The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises f... moreriction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads also known as oblique style are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’ allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board component or part.PTDLIN7291 PowerToolsDirect.com Delivery: in United Kingdom Report	£81.00 Buy in shop

	Lindstrom 7291 Supreme Oblique Cutting Nipper The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises f... moreriction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.Additional Information:• Length (mm): 108 Tooled-up.com Delivery: to United Kingdom Report	£82.95 Buy in shop

	Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises f... moreriction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.Additional Information:• Length (mm): 108 Mytoolshed.co.uk Delivery: in United Kingdom Report	£82.95 Buy in shop

	Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises f... moreriction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.Additional Information:• Length (mm): 108 Tooled-up.com Delivery: to United Kingdom Report	£82.95 Buy in shop

	Lindstrom Supreme Oblique Cutting Flush Cut Double Angled Head Nipper 108mm LIN7 The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises f... moreriction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved. Zoro.co.uk Delivery: in United Kingdom Report	£89.99 Buy in shop

	Bridgestone Dueler H/P Sport 255/60 R18 108Y AO 7291 The Dueler H/P Sport tyre lives up to the high performance standards of your premium Sport Truck or SUV. The non-vent design... moreand aggressive look of the sidewall fit the sleek lines of these imposing vehicles. In fact, the Dueler H/P Sport tyre is an Original Equipment choice in the category. Expect the tops in wet performance with a power traction combination of UNI-T technology and high silica content to let you drive with confidence in changing road conditions. MyTyres.co.uk Delivery: to United Kingdom Report	£145.18 Buy in shop

	Bridgestone Bridgestone Dueler Sport 255/60R18 108Y AO \| Protyre - SUV Tyres - Summer Tyres 7291 The Bridgestone Dueler H-P SPORT is a premium summer tyre designed for use on Sport Trucks, 4x4s, or SUVs. This tyre offers s... moreuperb dry performance, high traction on gravel and grass, good resistance to aquaplaning, and a smooth and comfortable ride. The Dueler H-P SPORT is suitable for use on vehicles such as the Ford EcoSport 4WD, Toyota RAV4, Dodge Dakota, Nissan Quest, Jeep Renegade, Subaru Forrester, Honda Pilot, Volkswagen Touareg, BMW X5, Mercedes-Benz ML350, Toyota Tundra, Ram 1500, Nissan Titan, Honda Ridgeline, Chevrolet Colorado, Isuzu DMAX, Ford Ranger, Chevrolet Silverado 1500 LD, and Nissan Frontier. Enhanced tyre strength Outstanding dry performance Excellent straight aquaplaning resistance Good performance on wet surfaces Comfortable ride Minimised vibrations at higher speeds Available with Run Flat Technology on certain sizes Protyre.co.uk Delivery: in United Kingdom Report	£146.17 Buy in shop

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.Additional Information:• Length (mm): 108

The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.

Saws: types, purpose and selection tipsA brief overview of different types of saws and sawing machines with tips on choosing the right tools

How to choose an angle grinderBrief instructions for choosing a grinder

How to place an order?How to add store?

Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!

Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm

Buy Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm

Lindstrom 7291 Supreme Oblique Cutting Flush Cut Double Angled Head Nipper 108Mm LIN7291

Lindstrom 7291 Supreme Oblique Cutting Nipper

Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm

Lindstrom 7291 Supreme Oblique Cutting Nipper 108mm

Lindstrom Supreme Oblique Cutting Flush Cut Double Angled Head Nipper 108mm LIN7

Bridgestone Dueler H/P Sport 255/60 R18 108Y AO 7291

Bridgestone Bridgestone Dueler Sport 255/60R18 108Y AO | Protyre - SUV Tyres - Summer Tyres 7291