Buy TP-LINK MC100CM 10/100Mbps Multi-Mode Media Converter (Black)
When you make a purchase through links on our site, we may receive a affiliate commission.
TP-Link MC100CM 10/100Mbps Multi-Mode Media Converter (Black)
The MC100CM is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Designed unde... morer IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fibre cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Other features of this module include the ability to be used as a standalone device (no chassis required) or with TP-Link's 19 inch system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC100CM will transmit at extended fibre optic distances utilizing multi-mode fibre up to 2 kilometres
TP-Link MC100CM 10100M RJ45 to 100M Multi-Mode SC Full Duplex up to
The MC100CM is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Designed unde... morer IEEE 802.3u 10100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fibre cable utilizing
Complies with 802.3u 10/100Base-TX, 100Base-FX standards.-Ability to configure the switch for Half-Duplex / Full-Duplex trans... morefer modes for the FX port.-Increases the range of fiber optics up to 2km.The MC100CM is a multimedia converter designed to convert 100BASE-FX fiber to 100Base-TX cable or vice versa.Designed to IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is used with multimode fiber optics using the SC connector.The MC100CM supports shortwave (SX) laser at full wire speed transfer rate.It works at 1310nm transmitting and receiving data.Other features of this module are the possibility of use as a stand-alone device (without the need for a rack or with TP-LINK´s 19´´ system rack, Auto MDI/MDI-X for the TX port, Duplex mode autonegotiation on the TX, and status LEDs on the front panel.The MC100CM transmits through multimode optical fiber, increasing the fiber distance up to 2 kilometers.Specifications:-Connectivity.Technology:Cable.-Fiber optic connector:SC.-Ethernet LAN ports (RJ -45):1 -Fiber Channel ports:1 -Width:94.5 mm -Depth:73 mm -Height:27 mm -Power consumption (max):2.5 W -Humidity storage relative:5 -90% -Operating relative humidity:10 -90% -Operating temperature range:0 -40 °C -Storage temperature range:-40 -70 °C -Ethernet LAN, Data transfer speed:1000 Mbit/s.- Network standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3x.- Maximum data transfer range:1000 Mbit/s.- Ethernet interface type:Gigabit Ethernet.-LED indicators:Yes.-Product color:Black.-.Certification:FCC, CE.-Internal:No.-Maximum transfer distance:2000 m.-Wavelength:1310 nm.
TP-Link 10/100M RJ45 to 100M Full-Duplex Multi-Mode SC Fiber Converter ( MC100CM) MC100CM
TP-Link 10/100M RJ45 to 100M Full-Duplex Multi-Mode SC Fiber Converter ( MC100CM)PRODUCT DESCRIPTION What This Product DoesT... morehe MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports long wave (LX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data. Other features of this module include the ability to be used as a standalone device (no chassis required) or with TP-LINK´s 19´´system chassis Auto MDI/MDI-X for TX port Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers. Highlights: ∙ Complies with 802.3u 10/100Base-TX 100Base-FX standards∙ Link Fault Pass-through and Far End Fault minimize the loss caused by link failure timely∙ Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port∙ Extends fiber distance up to 2km BOX CONTAINS Fiber ConverterPower AdapterUser Guide See more
The TP-Link MC100CM is a high-performance fiber converter designed to seamlessly convert 100 Mbps Ethernet signals from RJ4... more5 to SC fiber, utilizing multi-mode fiber technology. This device adheres to essential networking standards such as IEEE 802.3, IEEE 802.3u, and IEEE 802.3x, ensuring broad compatibility with various network equipment. With support for Ethernet LAN data rates of 10 and 100 Mbit/s, the MC100CM operates efficiently in both full and half-duplex modes, making it a versatile choice for diverse networking needs.
Equipped with an SC fiber optic connector, the TP-Link MC100CM can transmit data over impressive distances of up to 2000 meters at a wavelength of 1310 nm. This capability makes it particularly suitable for organizations looking to extend their network infrastructure without compromising on performance. The converter is compatible with CAT3, CAT4, CAT5, and CAT5e cables, ensuring that it can be integrated into existing setups with ease.
With a sleek black design, the MC100CM features wired connectivity technology that guarantees stable and secure connections, essential for maintaining network integrity. Its low power consumption, peaking at just 2.4 watts, highlights its energy-efficient design, making it an ideal solution for organizations aiming to incorporate fiber optic technology into their networks. The TP-Link MC100CM stands out as a robust and reliable choice for enhancing network performance and extending connectivity.
...
TP-Link MC100CM network media converter 100 Mbit/s 1310 nm Multi-mode Black
- Complies with 802.3u 10/100Base-TX 100Base-FX standards.
- Provides switch configuration of Half-Duplex / Full-Duplex tran... moresfer mode for FX port.
- Extends fiber distance up to 2km
The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required)or with TP-LINKs 19 system chassis Auto MDI/MDI-X for TX port Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2 kilometers.
The MC100CM is a media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fibre cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Other features of this module include the ability to be used as a standalone device (no chassis required) or with TP-Link's 19 inch system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC100CM will transmit at extended fibre optic distances utilizing multi-mode fibre up to 2 kilometres
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
