only diamond core bits & milling cuttersin all categories
only diamond core bits & milling cutters
United Kingdom

Trend MT/JIG Mortice & Tenon Jig Mt/Jig TREMTJIG

Photos - Diamond Core Bit / Milling Cutter Trend MT/JIG Mortice & Tenon Jig Mt/Jig TREMTJIG
from £260.00 up to £317.00 

Buy Trend MT/JIG Mortice & Tenon Jig Mt/Jig TREMTJIG

When you make a purchase through links on our site, we may receive a affiliate commission.

Trend MT/JIG Mortice & Tenon Jig Mt/Jig TREMTJIG

The Trend Mortice & Tenon Jig MT/JIG enables mortice tenons and dowel joints to be cut with a router. Ideal for cabinets chairs and table joints. There is a one set-up system for both mortice and tenon giving perfectly fitting joints and is fully adjustable for compound angle joints up to 45º. The reversible templates can be used to produce... moreround and square end tenons and for accurate dowelling applications. It cuts mortice and tenon sizes of 1/4in (6.35mm) to 5/8in (15.9mm). A Unibase may be required for certain makes and models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl N.CNC precision manufactured plates and body. Guide bushes are included but cutters are required. Specification Material Thickness: 12 - 47mm.Tenon Thickness: 4.8 - 16mm.Angle Tilt Compound: -10º to 45º.PTDTREMTJIG
PowerToolsDirect.com
Delivery: in United Kingdom
Report
£260.14
Buy in shop

Trend Mortise and Tenon Jig MT/JIG

Enables mortise & tenons and dowel joints to be cut with a router. Ideal for cabinet, chair and table. CNC precision manufactured plates and body. One set-up for both mortise and tenon giving perfectly fitting joints. Fully adjustable for compound angle joints up to 45 degree. Reversible templates to produce round and square end tenons. Tem... moreplates can be used for accurate dowelling applications. Cuts mortise & tenon sizes of 1/4 inch (6.35mm) to 5/8 inch (15.9mm). Guide bushes are included but cutters are required. A Unibase may be required for certain makes & models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl No. PCT/GB02/00253. Jig requires: A portable plunge router with 6.35 mm (1/4 inch) shank capacity. Contents: 5 x Plastic guide bushes 15.9mm, 22.2mm, 28.6mm, 30.2mm & 31.8mm 1 x Metal guide bush 25.4mm 4 x Clamps 1 x Guide bush collar 25.4mm to 54mm 1 x Set-up Bar imperial scale
Mytoolshed.co.uk
Delivery: in United Kingdom
Report
£316.95
Buy in shop

Trend Mortise and Tenon Jig MT/JIG

Enables mortise & tenons and dowel joints to be cut with a router. Ideal for cabinet, chair and table. CNC precision manufactured plates and body. One set-up for both mortise and tenon giving perfectly fitting joints. Fully adjustable for compound angle joints up to 45 degree. Reversible templates to produce round and square end tenons. Tem... moreplates can be used for accurate dowelling applications. Cuts mortise & tenon sizes of 1/4 inch (6.35mm) to 5/8 inch (15.9mm). Guide bushes are included but cutters are required. A Unibase may be required for certain makes & models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl No. PCT/GB02/00253. Jig requires: A portable plunge router with 6.35 mm (1/4 inch) shank capacity. Contents: 5 x Plastic guide bushes 15.9mm, 22.2mm, 28.6mm, 30.2mm & 31.8mm 1 x Metal guide bush 25.4mm 4 x Clamps 1 x Guide bush collar 25.4mm to 54mm 1 x Set-up Bar imperial scale
Tooled-up.com
Delivery: to United Kingdom
Report
£316.95
Buy in shop
The Trend Mortice & Tenon Jig MT/JIG enables mortice tenons and dowel joints to be cut with a router. Ideal for cabinets chairs and table joints. There is a one set-up system for both mortice and tenon giving perfectly fitting joints and is fully adjustable for compound angle joints up to 45º. The reversible templates can be used to produce round and square end tenons and for accurate dowelling applications. It cuts mortice and tenon sizes of 1/4in (6.35mm) to 5/8in (15.9mm). A Unibase may be required for certain makes and models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl N.CNC precision manufactured plates and body. Guide bushes are included but cutters are required. Specification Material Thickness: 12 - 47mm.Tenon Thickness: 4.8 - 16mm.Angle Tilt Compound: -10º to 45º.PTDTREMTJIG
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.

How to Properly Store Charging Stations, Power Banks, Batteries, and GeneratorsCompliance with storage rules will help extend the life of backup power equipment.
Drill chuck: types and differencesSpecifics of different types of chucks for drilling and working with fasteners
How to place an order?How to add store?
Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!
You may be interested in