Buy Professional Tool Industries 16.5mm x 184mm HSS Reduced Shank Blacksmith Drill B
When you make a purchase through links on our site, we may receive a affiliate commission.
Professional Tool Industries 16.5mm x 184mm HSS Reduced Shank Blacksmith Drill B
Reduced shank, also known as blacksmiths drills, are a general purpose metric HSS drill for drilling steel, cast iron, non-fe... morerrous metals, plastics and wood. With or smaller reduced parallel shank, for drilling larger holes. For use in bench and power drills equipped with a 13mm chuck, and preferably with variable speed to avoid overheating. Suitable for general purpose drilling in wood metal and plastic. Diameter: 16.5mm Length: 184mm
Professional Tool Industries 16.5mm x 184mm HSS Reduced Shank Blacksmith Drill B 2165
Reduced shank, also known as blacksmiths drills, are a general purpose metric HSS drill for drilling steel, cast iron, non-fe... morerrous metals, plastics and wood. With or smaller reduced parallel shank, for drilling larger holes. For use in bench and power drills equipped with a 13mm chuck, and preferably with variable speed to avoid overheating. Suitable for general purpose drilling in wood metal and plastic. Diameter: 16.5mm Length: 184mm
RUST-OLEUM® Hard Hat Aerosol Topcoats 2165 are based on a fast drying short oil soya alkyd. The products are based on lead- a... morend chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Bright RedPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Rust Oleum Hard Hat Metal Spray Paint Bright Red 500ml 2165
RUST-OLEUM® Hard Hat Aerosol Topcoats 2165 are based on a fast drying short oil soya alkyd. The products are based on lead- a... morend chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Bright RedPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
RUST-OLEUM® Hard Hat Aerosol Topcoats 2165 are based on a fast drying short oil soya alkyd. The products are based on lead- a... morend chromate free pigments.Recommended Uses:Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates. Intended for small maintenance jobs or for touch-up. Should be used in light industrial exposures, normal humidity and interior applications. SpecificationsSize: 500 mlAppearance: High gloss, 2190 and 2178 are flat Colour: Bright RedPropellant: Dimethyl ether Recommended film thickness: 25 µm dry, equals averagely 100 µm wet VOC-content: 640 - 650 g/l Drying times:20°C/50% r.v:To touch: 15 minutes To handle: 30 minutes To recoat: Within 1 hour or after 48 hours Full hardness 7 days Heat resistance: 100°C (dry heat), above 65°C discoloration may occurCoverage: Theoretical: 2.5 m² per spray can at 25 µm dry Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Reduced shank, also known as blacksmiths drills, are a general purpose metric HSS drill for drilling steel, cast iron, non-ferrous metals, plastics and wood. With or smaller reduced parallel shank, for drilling larger holes. For use in bench and power drills equipped with a 13mm chuck, and preferably with variable speed to avoid overheating. Suitable for general purpose drilling in wood metal and plastic. Diameter: 16.5mm Length: 184mm
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
